MEVA item finder

Note that the illustrations may vary from the listed and described articles.

System Product Ref.-No. Size kg Product Website Description/Application Product Picture
EcoAs EA panels 21-703-11 300/100 3,00 101,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-703-21 300/ 80 2,40 86,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-703-26 300/ 75 2,25 82,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-703-46 300/ 55 1,65 68,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-703-51 300/ 50 1,50 65,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-703-71 300/ 30 0,90 45,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-703-76 300/ 25 0,75 41,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-700-21 240/ 80 1,92 68,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-700-46 240/ 55 1,32 53,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-700-51 240/ 50 1,20 51,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-700-56 240/ 45 1,08 48,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-700-61 240/ 40 0,96 40,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-700-76 240/ 25 0,60 32,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-705-21 160/ 80 1,28 47,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-705-46 160/ 55 0,88 37,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-705-51 160/ 50 0,80 36,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-705-56 160/ 45 0,72 33,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-705-61 160/ 40 0,64 27,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-705-76 160/ 25 0,40 21,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-710-21 120/ 80 0,96 37,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-710-46 120/ 55 0,66 30,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-710-51 120/ 50 0,60 28,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-710-56 120/ 45 0,54 27,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-710-61 120/ 40 0,48 21,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-710-71 120/ 30 0,36 18,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-710-76 120/ 25 0,30 16,5 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA panels 21-715-61 80/ 40 0,32 15,0 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Thanks to their high-quality annealed powder coating, priming and cavity sealing they are corrosion-resistant and easy to clean. EA panels are equipped with alkus AL 17 all plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EA-multi purpose panel 21-720-51 0,72 33,5 EcoAs EcoAs panel with perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used in connection with stop end fixture 23/40. -
EcoAs Foundation tape 29-307-50 20,0 EcoAs Galvanized. Hole spacing 50 mm, hole Ø 16 mm, length 50 m. Adm. tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioner as bottom anchoring when assembling panels in horizontal position.
EcoAs Tensioner EA for foundation tape 29-307-75 1,3 EcoAs Galvanized. Connects the foundation tape to EcoAs or AluFix panels and serves as bottom anchoring when assembling panels in horizontal position. Two tensioners are required per anchoring position.
EcoAs Trolley for foundation tape 29-307-55 21,8 EcoAs Not shown. Galvanized. Is used to transport and cut the foundation tape to length. Suitable for one roll. Pneumatic wheels. -
EcoAs EA inside corner Alu(minium) 21-724-10 1,50 31,3 EcoAs Aluminium frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm.
EcoAs EA inside corner Alu(minium) 21-724-20 1,20 25,2 EcoAs Aluminium frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm.
EcoAs EA inside corner Alu(minium) 21-724-30 0,80 17,3 EcoAs Aluminium frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm.
EcoAs EA inside corner Alu(minium) 21-724-40 0,60 13,4 EcoAs Aluminium frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm.
EcoAs EA outside corner 21-725-75 0,30 15,6 EcoAs Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles.
EcoAs EA outside corner 21-725-85 0,24 13,0 EcoAs Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles.
EcoAs EA outside corner 21-725-90 0,16 9,0 EcoAs Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles.
EcoAs EA outside corner 21-725-95 0,12 6,5 EcoAs Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles.
EcoAs EA hinged inside corner 21-726-30 1,44 57,0 EcoAs Steel construction with steel sheeting, primed and cavity-sealed. Side length 30 cm. Adjustable angle 60° to 180°.
EcoAs EA hinged inside corner 21-726-40 0,72 29,0 EcoAs Steel construction with steel sheeting, primed and cavity-sealed. Side length 30 cm. Adjustable angle 60° to 180°.
EcoAs EA hinged outside corner 21-726-50 0,36 40,0 EcoAs Steel construction with steel sheeting, primed and cavity-sealed. Side length 7,5 cm. Adjustable angle 60° to 180°.
EcoAs EA hinged outside corner 21-726-60 0,18 20,2 EcoAs Steel construction with steel sheeting, primed and cavity-sealed. Side length 7,5 cm. Adjustable angle 60° to 180°.
EcoAs EA assembly lock 29-205-50 1,5 EcoAs Galvanized. Tightly connects and aligns EA panels. Clamping length 4,6 cm.
EcoAs EA assembly lock 29-205-55 1,9 EcoAs Galvanized. Tightly connects and aligns EA panels. Clamping length 4,6 cm.
EcoAs Uni-assembly lock 29-400-85 3,6 EcoAs Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
EcoAs Uni-assembly lock 29-400-90 3,9 EcoAs Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
EcoAs Flange screw 29-401-10 1,1 EcoAs Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
EcoAs Flange screw 29-401-12 1,2 EcoAs Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
EcoAs EA steel filler 21-726-00 0,12 13,0 EcoAs Completely made of steel, primed and cavity-sealed, with tie holes. For length adjustment of 5 cm, particularly in corners. For the required quantity of Uni-assembly locks see Technical Instruction Manual EcoAs.
EcoAs EA steel filler 21-726-10 0,06 6,5 EcoAs Completely made of steel, primed and cavity-sealed, with tie holes. For length adjustment of 5 cm, particularly in corners. For the required quantity of Uni-assembly locks see Technical Instruction Manual EcoAs.
EcoAs EA compensation plate 21-726-20 0,24 11,8 EcoAs Steel construction with steel sheeting, primed and cavity-sealed. Is used to compensate gaps of 6 to 20 cm and attached to panels with 2 EA assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
EcoAs Dismantling auxiliary 120 29-306-20 3,6 EcoAs 10 cm wide, 120 cm high. Diagonally divided timber filler. Permits easy stripping in restricted areas such as shafts and staircases. Two Uni-assembly locks are required per dismantling auxiliary. Alignment rails must be used for reinforcement. Delivery and weight by pairs.
EcoAs Stop end bracket 29-105-45 12,2 EcoAs Galvanized. Is used to form stop ends and suited for frame formwork panels with a profile width of 23 mm (EcoAs, AluFix), 40 mm (StarTec, AluStar) and 60 mm (Mammut, Mammut 350).
EcoAs Stop end bracket 29-105-60 20,0 EcoAs Galvanized. Is used to form stop ends and suited for frame formwork panels with a profile width of 23 mm (EcoAs, AluFix), 40 mm (StarTec, AluStar) and 60 mm (Mammut, Mammut 350).
EcoAs Timber fixture 29-105-90 1,5 EcoAs Galvanized. Is used to attach 10 to 12 cm high squared timbers when bracing panel joints for crane ganging or when bridging problem areas.
EcoAs Stop end fixture 23/40 29-402-85 3,0 EcoAs Yellow chromated. Is used together with the EcoAs or StarTec multi-purpose panel to form outside corners and abutments. Is suited for the frame profiles of EcoAs and AluFix (23 mm) and AluStar/StarTec (40 mm). A flange nut 100 or an articulated flange nut 15/120 is also required.
EcoAs Plug D20 29-902-63 0,1 EcoAs Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec).
EcoAs Plug D20 29-902-62 0,1 EcoAs Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec).
EcoAs AS alignment rail 29-201-73 5,2 EcoAs Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas and brace compensation areas. Is attached to the formwork with flange screws.
EcoAs AS alignment rail 29-201-75 10,5 EcoAs Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas and brace compensation areas. Is attached to the formwork with flange screws.
EcoAs AS alignment rail 29-201-80 19,0 EcoAs Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas and brace compensation areas. Is attached to the formwork with flange screws.
EcoAs Tie rod DW 15/90 29-900-80 1,3 EcoAs Uncoated, not weldable. DW thread Ø 15 mm. Is used to tie panels of double-sided formwork. Adm. load capacity 90 kN (DIN 18216).
EcoAs Plastic tube 29-902-30 0,4 EcoAs Plastic spacer tube for tie holes. Two cones are also required per tie hole. D22/200: internal Ø 22 mm, external Ø 28 mm, standard length 2,00 m. D30/200: internal Ø 30 mm, external Ø 36 mm, standard length 2,00 m.
EcoAs Cone for plastic tube 29-902-40 12,9 EcoAs Available with 10 mm or 30 mm covering.
EcoAs Cone for plastic tube 29-902-50 3,2 EcoAs Available with 10 mm or 30 mm covering.
EcoAs Flange nut 100 29-900-20 0,7 EcoAs Forged, galvanized. For DW tie rods with 15 mm Ø. Plate Ø 100 mm, SW 27. Admissible load capacity 90 kN (DIN 18216).
EcoAs Articulated flange nut 15/120 29-900-10 1,8 EcoAs Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
EcoAs Spanner SW 27 29-800-10 1,8 EcoAs Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws.
EcoAs Drive nut 60 29-900-23 0,5 EcoAs Galvanized. DW thread Ø 15 mm, plate Ø 60 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie the formwork to the ground or to a wall connection.
EcoAs Tie claw 23 29-901-44 0,2 EcoAs Galvanized. Permits tieing (with tie rod DW 15 and flange nut 100) directly above or beside EcoAs and AluFix panels.
EcoAs Crane hook 29-103-05 6,0 EcoAs Coated. Is used to move and crane-gang AluFix and EcoAs panels. Self-locking. Load capacity 6 kN (600 kg). Always two crane hooks required per gang. Refer to the crane hook Operating Instructions for application and safety test.
EcoAs Brace frame 250 29-109-25 27,5 EcoAs Galvanized. Available with or without formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18.
EcoAs Brace frame 250 29-109-20 31,5 EcoAs Galvanized. Available with or without formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18.
EcoAs Formwork-prop connector 29-804-85 1,7 EcoAs Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Is used to connect braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18.
EcoAs Walkway bracket 29-106-00 10,3 EcoAs Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
EcoAs Walkway bracket 29-106-50 11,8 EcoAs Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
EcoAs Side railing 29-108-20 12,3 EcoAs Galvanized. Is plugged into the walkway bracket.
EcoAs Side railing 29-108-30 13,8 EcoAs Galvanized. Is plugged into the walkway bracket.
EcoAs Guard-railing post 29-106-75 3,7 EcoAs Galvanized. Is plugged into the walkway bracket.
EcoAs Guard-railing post 29-106-85 4,7 EcoAs Galvanized. Is plugged into the walkway bracket.
EcoAs Guard-railing post 48 29-106-80 5,5 EcoAs Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
EcoAs Guard-railing post 48 29-920-80 5,5 EcoAs Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
EcoAs Support 800 for guard-railing post 29-108-50 10,2 EcoAs Galvanized. For the side protection at all MEVA wall formwork systems. With support for planking. Allows guard-railing posts to be plugged in. Is attached to the DW-threaded nut with a flange screw 18. Guard-railing posts and flange screws 18 must be ordered separately.
EcoAs Scaffold tube 29-412-23 9,4 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Scaffold tube 29-412-26 14,1 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Scaffold tube 29-412-27 18,8 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Scaffold tube 29-412-25 23,5 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Scaffold tube 29-412-28 28,2 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Swivel-joint coupler 48/48 29-412-52 1,2 EcoAs Galvanized. Connects 2 scaffold tubes with 48,3 mm Ø at any angle.
EcoAs Transport angle 10 29-305-10 16,0 EcoAs Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
EcoAs Transport angle 10 29-305-15 10,4 EcoAs Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
EcoAs Safety bolt 40-131-10 19,0 EcoAs Plastic, black. Secures stacked AluFix, EcoAs, AluStar and StarTec panels.
AluFix AF panels 22-134-25 300/ 75 2,25 49,7 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-134-40 300/ 60 1,80 41,8 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-134-50 300/ 50 1,50 35,3 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-134-55 300/ 45 1,35 32,8 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-134-60 300/ 40 1,20 30,2 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-134-70 300/ 30 0,90 23,8 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-134-75 300/ 25 0,75 21,3 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-120-54 264/ 75 1,98 40,6 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-122-04 264/ 60 1,58 33,9 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-123-04 264/ 50 1,32 29,5 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-123-54 264/ 45 1,19 27,1 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-124-04 264/ 40 1,06 25,0 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-125-04 264/ 30 0,79 20,6 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-125-54 264/ 25 0,66 18,4 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-135-25 150/ 75 1,13 24,8 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-135-40 150/ 60 0,90 20,9 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-135-45 150/ 55 0,83 19,2 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-135-55 150/ 45 0,68 16,6 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-135-60 150/ 40 0,60 15,4 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-135-70 150/ 30 0,45 11,7 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-135-75 150/ 25 0,38 10,5 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-127-04 132/ 75 0,99 20,9 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-128-54 132/ 60 0,79 17,4 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-129-54 132/ 50 0,66 15,1 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-130-04 132/ 45 0,59 14,0 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-130-54 132/ 40 0,53 12,9 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-131-54 132/ 30 0,40 10,6 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-132-04 132/ 25 0,33 9,4 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-136-25 75/ 75 0,56 14,5 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-136-40 75/ 60 0,45 11,8 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-136-50 75/ 50 0,38 10,4 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-136-55 75/ 45 0,34 9,5 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-136-60 75/ 40 0,30 8,5 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-136-70 75/ 30 0,23 6,9 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AF panels 22-136-75 75/ 25 0,19 6,1 AluFix Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm, two tie holes per panel height 150, 132 and 75 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix Foundation tape 29-307-50 20,0 AluFix Galvanized. Hole spacing 50 mm, hole Ø 16 mm, length 50 m. Adm. tractive force 10 kN. To be cut at hole center. Together with the appropriate tensioner it serves as bottom tie when panels are assembled in horizontal position.
AluFix Tensioner EA for foundation tape 29-307-75 1,3 AluFix Galvanized. Connects the foundation tape to EcoAs or AluFix-panels and serves as bottom tie when panels are assembled in horizontal position. Two tensioners are required per tieing position.
AluFix Trolley for foundation tape 29-307-55 21,8 AluFix Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels. -
AluFix AF special panes 22-134-30 300/ 70 2,10 46,8 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-134-35 300/ 65 1,95 44,2 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-134-45 300/ 55 1,65 38,1 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-134-56 300/ 44 1,32 32,3 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-134-62 300/ 38 1,14 27,9 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-134-64 300/ 36 1,08 26,9 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-134-65 300/ 35 1,05 26,4 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-134-80 300/ 24 0,72 20,9 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-134-85 300/ 20 0,60 18,7 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-121-04 264/ 70 1,85 38,3 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-121-54 264/ 65 1,72 36,0 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-122-54 264/ 55 1,45 31,7 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-124-34 264/ 38 1,00 24,1 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-124-44 264/ 36 0,95 23,2 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-124-54 264/ 35 0,92 22,8 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-126-04 264/ 20 0,53 16,3 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-135-50 150/ 50 0,75 17,9 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-135-56 150/ 44 0,66 16,4 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-135-62 150/ 38 0,57 13,7 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-135-64 150/ 36 0,54 13,2 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-135-65 150/ 35 0,53 12,9 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-135-80 150/ 24 0,36 10,3 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-135-85 150/ 20 0,30 9,3 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-127-54 132/ 70 0,92 19,8 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-128-04 132/ 65 0,86 18,6 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-129-04 132/ 55 0,73 16,3 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-130-64 132/ 38 0,50 12,4 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-130-74 132/ 36 0,48 11,9 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-131-04 132/ 35 0,46 11,7 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-132-54 132/ 20 0,26 8,4 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-136-30 75/ 70 0,53 13,4 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-136-45 75/ 55 0,41 11,2 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-136-65 75/ 35 0,26 7,8 AluFix Made to order, delivery time to be agreed.
AluFix AF special panes 22-136-85 75/ 20 0,15 5,3 AluFix Made to order, delivery time to be agreed.
AluFix AF radius panels 22-152-10 264/ 15 0,40 39,7 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AF formwork to be used as polygonal formwork.
AluFix AF radius panels 22-152-20 264/ 20 0,53 41,3 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AF formwork to be used as polygonal formwork.
AluFix AF radius panels 22-152-30 264/ 25 0,66 49,9 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AF formwork to be used as polygonal formwork.
AluFix AF radius panels 22-153-10 132/ 15 0,20 20,4 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AF formwork to be used as polygonal formwork.
AluFix AF radius panels 22-153-20 132/ 20 0,26 21,2 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AF formwork to be used as polygonal formwork.
AluFix AF radius panels 22-153-30 132/ 25 0,33 25,3 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AF formwork to be used as polygonal formwork.
AluFix AF tensioning bow 22-153-90 3,4 AluFix Takes up the anchor load when forming polygonal constructions with radius panels.
AluFix AF inside corner Alu(minium) 22-154-10 1,20 28,0 AluFix Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AF inside corner Alu(minium) 22-154-30 0,60 14,5 AluFix Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AF inside corner Alu(minium) 22-154-20 1,06 25,5 AluFix Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AF inside corner Alu(minium) 22-154-40 0,53 13,5 AluFix Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AF inside corner Alu(minium) 22-154-50 0,30 7,8 AluFix Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AF outside corner Alu(minium) 22-150-02 9,2 AluFix Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AF outside corner Alu(minium) 22-150-05 8,1 AluFix Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AF outside corner Alu(minium) 22-150-12 4,7 AluFix Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AF outside corner Alu(minium) 22-150-15 4,2 AluFix Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AF outside corner Alu(minium) 22-150-17 2,6 AluFix Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AF hinged inside corner 22-151-80 1,20 68,5 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Side length 20 cm. Adjustable angle 80°-180° when used as inside corner, or 95°-180° when used as outside corner.
AluFix AF hinged inside corner 22-150-80 1,06 60,2 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Side length 20 cm. Adjustable angle 80°-180° when used as inside corner, or 95°-180° when used as outside corner.
AluFix AF hinged inside corner 22-151-90 0,60 35,0 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Side length 20 cm. Adjustable angle 80°-180° when used as inside corner, or 95°-180° when used as outside corner.
AluFix AF hinged inside corner 22-150-90 0,53 30,6 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Side length 20 cm. Adjustable angle 80°-180° when used as inside corner, or 95°-180° when used as outside corner.
AluFix AF hinged outside corner 22-151-60 0,45 40,1 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Side length 1,5 cm. Adjustable angle 0°-120°.
AluFix AF hinged outside corner 22-150-60 1,20 35,5 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Side length 1,5 cm. Adjustable angle 0°-120°.
AluFix AF hinged outside corner 22-151-70 0,23 20,5 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Side length 1,5 cm. Adjustable angle 0°-120°.
AluFix AF hinged outside corner 22-150-70 0,20 18,0 AluFix Steel construction with steel sheeting. Primed and cavity-sealed. Side length 1,5 cm. Adjustable angle 0°-120°.
AluFix Assembly lock 29-205-50 1,5 AluFix Galvanized. Tightly connects and aligns AluFix and EcoAs panels. Clamping length 4,6 cm. Three assembly locks are required per panel joint for a panel height of 3,00 m and two assembly locks per panel joint for a panel height of 2,64 m or 1,32 m.
AluFix Assembly lock 29-205-55 1,9 AluFix Galvanized. Tightly connects and aligns AluFix and EcoAs panels. Clamping length 4,6 cm. Three assembly locks are required per panel joint for a panel height of 3,00 m and two assembly locks per panel joint for a panel height of 2,64 m or 1,32 m.
AluFix Uni-assembly lock 29-400-85 3,6 AluFix Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
AluFix Uni-assembly lock 29-400-90 3,9 AluFix Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
AluFix Uni-assembly lock 29-103-60 2,0 AluFix Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
AluFix E-assembly lock with coupling 29-802-70 1,0 AluFix Galvanized. Is used to attach push-pull props at the AluFix and EcoAs panel joints. Clamping length 4,6 cm.
AluFix Flange screw 29-401-10 1,1 AluFix Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
AluFix Flange screw 29-401-12 1,2 AluFix Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
AluFix AF compensation profile 29-200-20 12,0 AluFix Steel frame profile with angles. Primed and cavity-sealed. Is clamped to the AF panel with two E assembly locks and used for job-built fillers consisting of short squared timber and a facing. Delivery and weight by pairs.
AluFix AF compensation profile 29-200-30 6,0 AluFix Steel frame profile with angles. Primed and cavity-sealed. Is clamped to the AF panel with two E assembly locks and used for job-built fillers consisting of short squared timber and a facing. Delivery and weight by pairs.
AluFix Corner bracket 40/60 29-402-25 9,5 AluFix Galvanized. Side lengths 40 cm and 60 cm. For inside and outside corners and column formwork.
AluFix Plug D20 29-902-63 0,1 AluFix Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec).
AluFix Plug D20 29-902-62 0,1 AluFix Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec).
AluFix AS alignment rail 29-201-73 5,2 AluFix Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluFix AS alignment rail 29-201-75 10,5 AluFix Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluFix AS alignment rail 29-201-80 19,0 AluFix Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluFix Tie rod DW 15/90 29-900-80 1,3 AluFix Uncoated, not weldable. DW thread Ø 15 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie panels of a double-sided formwork.
AluFix Plastic tube 29-902-30 0,4 AluFix Plastic spacer tube for tie holes. Two cones are also required per tie hole. D22/200: internal Ø 22 mm, external Ø 28 mm, standard length 2,00 m. D30/200: internal Ø 30 mm, external Ø 36 mm, standard length 2,00 m.
AluFix Cone for plastic tube 29-902-40 12,9 AluFix Available with 10 mm or 30 mm covering .
AluFix Cone for plastic tube 29-902-50 3,2 AluFix Available with 10 mm or 30 mm covering .
AluFix Articulated flange nut 15/120 29-900-10 1,8 AluFix Forged, galvanized. DIN 18218. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
AluFix Spanner SW 27 29-800-10 1,8 AluFix Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws.
AluFix Drive nut 60 29-900-23 0,5 AluFix Galvanized. DW thread Ø 15 mm, plate Ø 60 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie the formwork to the ground or to a wall connection.
AluFix Tie claw 23 29-901-44 0,2 AluFix Galvanized. Permits tieing (with tie rod DW 15 and flange nut 100) directly above or beside EcoAs and AluFix panels.
AluFix Crane hooks 29-103-05 6,0 AluFix Coated. Is used to move and crane-gang AluFix and EcoAs panels. Self-locking. Load capacity 6 kN (600 kg). Always two crane hooks required per gang. Refer to the crane hook Operating Instructions for application and safety test.
AluFix Brace frame 250 29-109-25 27,5 AluFix Galvanized. Aligns and braces the formwork. Available with or without formwork-prop connector. Consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate. The formwork-prop connectors are attached to the formwork with flange screws 18.
AluFix Brace frame 250 29-109-20 31,5 AluFix Galvanized. Aligns and braces the formwork. Available with or without formwork-prop connector. Consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate. The formwork-prop connectors are attached to the formwork with flange screws 18.
AluFix Formwork-prop connector 29-804-85 1,7 AluFix Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
AluFix Walkway bracket 29-106-00 10,3 AluFix Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
AluFix Walkway bracket 29-106-50 11,8 AluFix Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
AluFix Walkway bracket 29-104-82 8,0 AluFix Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
AluFix Side railing 29-108-20 12,3 AluFix Galvanized. Is plugged into the walkway bracket.
AluFix Side railing 29-108-30 13,8 AluFix Galvanized. Is plugged into the walkway bracket.
AluFix Guard-railing post 29-106-75 3,7 AluFix Galvanized. Is plugged into the walkway bracket.
AluFix Guard-railing post 29-106-85 4,7 AluFix Galvanized. Is plugged into the walkway bracket.
AluFix Guard-railing post 48 29-106-80 5,5 AluFix Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
AluFix Guard-railing post 48 29-920-80 5,5 AluFix Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
AluFix Support 800 guard-railing post 29-108-50 10,2 AluFix Galvanized. For the side protection at all MEVA wall formwork systems. Allows the extension for guard-railing KLK 230 and all MEVA guard-railing posts to be plugged in. Guard-railing posts and flange screws 18 must be ordered separately.
AluFix Scaffold tube 29-412-23 9,4 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Scaffold tube 29-412-26 14,1 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Scaffold tube 29-412-27 18,8 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Scaffold tube 29-412-25 23,5 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Scaffold tube 29-412-28 28,2 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Swivel-joint coupler 48/48 29-412-52 1,2 AluFix Galvanized. Connects 2 scaffold tubes with Ø 48,3 mm at any angle required.
AluFix Transport angle 29-305-15 10,4 AluFix Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
AluFix Transport angle 29-305-10 16,0 AluFix Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
AluFix AS/ST safety bolt, black 40-131-10 19,0 AluFix Plastic, black. Secures stacked AluFix, Ecos, AluStar and StarTec panels.
AluFix AF prop head 29-202-80 1,5 AluFix Painted. Supports AluFix panels for slabs up to 46 cm thick. The prop head is plugged to the prop’s head or foot plate and secured with pin 14/90 (or with pin 14/135 to the outer tube of the MEP prop).
AluFix Tripod 29-905-50 12,2 AluFix Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The turnable legs allow the tripod to be used in rooms, along walls or in corners. The tripod can be attached to the aluminium profile of the MEP props with the MD safety claw.
AluFix Tripod 29-905-52 17,7 AluFix Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The turnable legs allow the tripod to be used in rooms, along walls or in corners. The tripod can be attached to the aluminium profile of the MEP props with the MD safety claw.
AluFix Pin 29-909-94 0,1 AluFix Galvanized. Is used to attach MD drop heads, MD prop heads of forked prop heads, etc. to the props. Pin 14/90 is used for steel tube props up to Ø 63 mm. Pin 14/135 is used with the aluminium profile of MEP props and MEP extension pieces.
AluFix Pin 29-909-90 0,2 AluFix Galvanized. Is used to attach MD drop heads, MD prop heads of forked prop heads, etc. to the props. Pin 14/90 is used for steel tube props up to Ø 63 mm. Pin 14/135 is used with the aluminium profile of MEP props and MEP extension pieces.
AluFix EuMax 30 29-907-46 (98-150) 10,4 AluFix Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 30 29-907-51 (152-250) 18,1 AluFix Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 30 29-907-61 (202-350) 23,0 AluFix Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 30 29-907-62 (252-450) 32,4 AluFix Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 20 29-907-36 (177-300) 16,9 AluFix Galvanized. According to the European Standard EN 1065, class D. The admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 20 29-907-41 (225-400) 23,8 AluFix Galvanized. According to the European Standard EN 1065, class D. The admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 20 29-907-45 (302-550) 38,0 AluFix Galvanized. According to the European Standard EN 1065, class D. The admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluStar AS panels 22-083-01 270/ 90 2,43 64,5 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-01 270/ 75 2,03 57,0 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-31 270/ 55 1,49 46,5 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-34 270/ 50 1,35 37,0 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-37 270/ 49 1,32 36,0 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-46 270/ 45 1,22 34,0 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-56 270/ 40 1,08 31,5 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-71 270/ 30 0,81 26,3 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-76 270/ 25 0,68 23,5 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-81 270/ 24 0,65 23,0 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-084-86 270/ 20 0,54 21,0 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-085-01 135/ 90 1,22 33,5 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-01 135/ 75 1,01 29,5 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-31 135/ 55 0,74 24,0 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-34 135/ 50 0,68 19,2 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-37 135/ 49 0,66 18,9 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-46 135/ 45 0,61 17,8 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-56 135/ 40 0,54 16,5 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-71 135/ 30 0,41 13,7 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-76 135/ 25 0,34 12,4 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-81 135/ 24 0,32 12,1 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels 22-086-86 135/ 20 0,27 11,0 AluStar Construction height 12 cm, frame profile width 4 cm. Two tie holes per panel height 270 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panels are equipped with alkus AL 17 all-plastic facing or, alternatively, with a coated multi-layer plywood facing (15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar ST Multi-purpose panel 21-212-26 2,03 103,5 AluStar StarTec panel with perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used in connection with stop end fixture 23/40.
AluStar ST Multi-purpose panel 21-212-46 1,01 52,2 AluStar StarTec panel with perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used in connection with stop end fixture 23/40.
AluStar Foundation tape 29-307-50 20,0 AluStar Galvanized. Hole spacing 50 mm, hole Ø 16 mm, 50 long. Admissible tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioners as bottom anchoring when panels are assembled in horizontal position.
AluStar Tensioner AS/ST for foundation tape 29-307-70 1,4 AluStar Galvanized. Connects the foundation tape to AluStar or StarTec panels and serves as bottom anchoring when panels are assembled in horizontal position. Two tensioners are required per anchoring position.
AluStar Trolley for foundation tape 29-307-55 21,8 AluStar Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels. -
AluStar AS inside corner AL 22-150-24 1,35 34,5 AluStar Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes.
AluStar AS inside corner AL 22-150-34 0,68 18,7 AluStar Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes.
AluStar AS/ST outside corner 22-140-20 13,0 AluStar Aluminium with high-quality annealed powder coating. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
AluStar AS/ST outside corner 22-140-30 6,8 AluStar Aluminium with high-quality annealed powder coating. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
AluStar Outside corner Alu(minium) 22-140-25 0,27 16,1 AluStar Aluminium with high-quality annealed powder coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels EA assembly locks a fast and tight outside corner assembly for 90° angles.
AluStar Outside corner Alu(minium) 22-140-35 0,14 8,4 AluStar Aluminium with high-quality annealed powder coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels EA assembly locks a fast and tight outside corner assembly for 90° angles.
AluStar AS hinged inside corner 21-270-00 1,62 73,0 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 30 cm. Adjustable angle 60°-180°.
AluStar AS hinged inside corner 21-270-10 0,81 37,0 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 30 cm. Adjustable angle 60°-180°.
AluStar AS hinged outside corner 21-280-00 0,40 45,0 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 7,5 cm. Adjustable angle 60°-180°.
AluStar AS hinged outside corner 21-280-10 0,20 22,0 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 7,5 cm. Adjustable angle 60°-180°.
AluStar ST stripping corner 21-262-10 1,35 142,2 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17,5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
AluStar ST stripping corner 21-262-30 0,68 78,2 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17,5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
AluStar Adhesive tape, red 41-912-10 0,8 AluStar Not shown. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated. -
AluStar Stripping support 29-306-30 5,0 AluStar The stripping support is used to easily activate the stripping corner from above. Use a power screwdriver, a ratchet wrench or a spanner to activate the stripping support. The tools must have SW 27 or 30 or 36.
AluStar AS radius panel 21-500-00 0,41 38,9 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel 21-500-10 0,54 42,7 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel 21-500-20 0,68 50,0 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel 21-500-40 0,20 21,1 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel 21-500-50 0,27 23,0 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel 21-500-60 0,34 26,4 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS tensioning bow 21-500-95 5,4 AluStar Takes up the anchor load when forming polygonal constructions with radius panels.
AluStar AS assembly lock 29-205-00 2,0 AluStar Galvanized. Tightly connects and aligns AluStar and StarTec panels. Clamping length 8 cm.
AluStar Uni-assembly lock 29-400-85 3,6 AluStar Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
AluStar Uni-assembly lock 29-400-90 3,9 AluStar Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
AluStar Combi-lock with coupling 29-804-60 3,7 AluStar Galvanized. Is used to attach the push-pull props at the panel joint of the wall formwork AluStar, StarTec, Mammut and Mammut 350. Clamping length 8, 10 and 12 cm.
AluStar Flange screw 29-401-10 1,1 AluStar Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
AluStar Flange screw 29-401-12 1,2 AluStar Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
AluStar ST aluminium filler 21-270-60 0,14 7,9 AluStar Aluminium with high-quality powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler.
AluStar ST aluminium filler 21-270-65 0,07 4,2 AluStar Aluminium with high-quality powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler.
AluStar ST compensation plate 21-300-20 0,60 30,0 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
AluStar ST compensation plate 21-300-30 0,30 15,0 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
AluStar AS timber profile 29-200-03 5,5 AluStar Timber profile with groove. Is used for job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face. Is attached to the AS/ST panels with 2 AS assembly locks. Delivery and weight by pairs.
AluStar AS timber profile 29-200-05 2,7 AluStar Timber profile with groove. Is used for job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face. Is attached to the AS/ST panels with 2 AS assembly locks. Delivery and weight by pairs.
AluStar Corner angle 40/60 29-402-25 9,5 AluStar Galvanized. Side lengths 40 and 60 cm. For inside and outside corners.
AluStar Stop end fixture 23/40 yellow 29-402-85 3,0 AluStar Yellow chromated. Is used to attach alignment rails to the panels when forming stop ends are formed. Or is used in connection with multi-purpose panels (EcoAs, StarTec) to form outer corners or abutments. Suited for the frame profiles of EcoAs and AluFix (23 mm) and AluStar/StarTec (40 mm). A flange nut 100 or an articulated flange nut 15/120 are required in addition.
AluStar Stop end bracket 29-105-50 15,4 AluStar Galvanized. Is used to form stop ends. For profile widths of 23 mm (EcoAs, AluFix), 40 mm (AluStar, StarTec) and 60 mm (Mammut, Mammut 350). Max. wall thickness 40 cm.
AluStar Stop end bracket 29-105-45 12,2 AluStar Galvanized. Is used to form stop ends. For profile widths of 23 mm (EcoAs, AluFix), 40 mm (AluStar, StarTec) and 60 mm (Mammut, Mammut 350). Max. wall thickness 40 cm.
AluStar Plug D20 29-902-63 0,1 AluStar Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec).
AluStar Plug D20 29-902-62 0,1 AluStar Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec).
AluStar Alignment rail 29-201-73 5,2 AluStar Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluStar Alignment rail 29-201-75 10,5 AluStar Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluStar Alignment rail 29-201-80 19,0 AluStar Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluStar Tie rod DW 15/90 29-900-80 1,3 AluStar Uncoated, not weldable. DIN 18216. DW thread Ø 15 mm. Is used to tie panels of double-sided formwork. Adm. load 90 kN.
AluStar Articulated flange nut 15/120 29-900-10 1,8 AluStar Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
AluStar Spanner SW 27 29-800-10 1,8 AluStar Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws.
AluStar Uni-tie claw 29-901-41 1,5 AluStar Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with a frame profile width of 40 mm (AluStar/StarTec) or 60 mm (Mammut/Mammut 350).
AluStar AS crane hook 29-203-89 6,0 AluStar Is used to move panels. Self-locking. Load capacity: 15 kN (1,5 tons). Always 2 crane hooks required per gang. For use and safety check see the Operating Instructions.
AluStar Brace frame 250 29-109-25 27,5 AluStar Galvanized. Align and braces the formwork. Available with our without formwork-prop connector. Consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed foot plate. The formwork prop connectors are attached to the formwork with flange screws 18.
AluStar Brace frame 250 29-109-20 31,5 AluStar Galvanized. Align and braces the formwork. Available with our without formwork-prop connector. Consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed foot plate. The formwork prop connectors are attached to the formwork with flange screws 18.
AluStar Formwork-prop connector 29-804-85 1,7 AluStar Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
AluStar Double-jointed foot plate 29-402-32 4,0 AluStar Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm.
AluStar Walkway bracket 29-106-00 10,3 AluStar Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
AluStar Walkway bracket 29-106-50 11,8 AluStar Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
AluStar Side railing 29-108-20 12,3 AluStar Galvanized. Is plugged into the walkway bracket.
AluStar Side railing 29-108-30 13,8 AluStar Galvanized. Is plugged into the walkway bracket.
AluStar M profile for extension for guard-railing KLK 29-411-72 7,0 AluStar Painted. Is used to attach the extension for guard-railing KLK and attached to the AluStar and StarTec panels with 2 Uni-assembly locks.
AluStar Guard-railing post 29-106-75 3,7 AluStar Galvanized. Is plugged into the walkway bracket.
AluStar Guard-railing post 29-106-85 4,7 AluStar Galvanized. Is plugged into the walkway bracket.
AluStar Guard-railing post 48 29-106-80 5,5 AluStar Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
AluStar Guard-railing post 48 29-920-80 5,5 AluStar Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
AluStar Support guard 800-railing post 29-108-50 10,2 AluStar Galvanized. For the side protection at all MEVA wall formwork systems. Allows the extension for guard-railing KLK 230 and all MEVA guard-railing posts to be plugged in. Guard-railing posts and flange screws 18 must be ordered separately.
AluStar Scaffold tube 29-412-23 9,4 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Scaffold tube 29-412-26 14,1 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Scaffold tube 29-412-27 18,8 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Scaffold tube 29-412-25 23,5 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Scaffold tube 29-412-28 28,2 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Swivel-joint coupler 48/48 29-412-52 1,2 AluStar Galvanized. Connects 2 scaffold tubes with Ø 48,3 mm at any angle required.
AluStar Transport angle 12 29-305-20 16,5 AluStar Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as max. capacity for the whole stack. It is recommended to use 2 foldable angles and 2 angles of the rigid type for each stack.
AluStar Transport angle 12 29-305-25 12,7 AluStar Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as max. capacity for the whole stack. It is recommended to use 2 foldable angles and 2 angles of the rigid type for each stack.
AluStar AS/ST safety bolt 40-131-10 19,0 AluStar Plastic, black. Secures stacked AluStar and StarTec panels.
StarTec ST panels 21-217-06 330/135 4,46 253,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-217-11 330/ 90 2,97 125,5 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-217-26 330/ 75 2,48 112,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-217-46 330/ 55 1,82 93,5 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-217-49 330/ 50 1,65 88,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-217-71 330/ 30 0,99 62,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-217-76 330/ 25 0,83 58,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-03 270/240 6,48 388,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-06 270/135 3,65 206,5 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-11 270/ 90 2,43 103,4 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-26 270/ 75 2,03 90,9 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-46 270/ 55 1,49 72,8 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-49 270/ 50 1,35 67,9 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-52 270/ 49 1,32 67,1 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-56 270/ 45 1,22 64,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-61 270/ 40 1,08 60,2 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-71 270/ 30 0,81 48,4 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-76 270/ 25 0,68 45,7 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-78 270/ 24 0,65 44,9 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-200-81 270/ 20 0,54 41,4 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-06 135/135 1,82 74,7 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-11 135/ 90 1,22 53,6 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-26 135/ 75 1,01 47,3 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-46 135/ 55 0,74 38,6 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-49 135/ 50 0,68 36,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-52 135/ 49 0,66 35,8 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-56 135/ 45 0,61 33,9 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-61 135/ 40 0,54 31,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-71 135/ 30 0,41 26,7 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-76 135/ 25 0,34 25,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-78 135/ 24 0,32 24,4 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-210-81 135/ 20 0,27 21,1 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-211-11 90/ 90 0,81 39,3 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-211-26 90/ 75 0,68 34,6 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-211-46 90/ 55 0,50 28,3 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-211-49 90/ 50 0,45 26,0 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels 21-211-76 90/ 25 0,23 18,1 StarTec Construction height 12 cm, frame profile width 4 cm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus AL 20 or AL 17 facing. As an alternative, the panels can be delivered with a multi-layer plywood facing (18 mm or 15 mm). All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panel ... /240 AL20 21-215-00 135/240 3,24 217,5 StarTec Suited to stack ST-panels 270/240 at top or at bottom.
StarTec ST panel ... /240 AL20 21-215-60 75/240 1,80 129,1 StarTec Suited to stack ST-panels 270/240 at top or at bottom.
StarTec ST multi-purpose panel AL 17 21-212-26 2,03 103,5 StarTec StarTec panel with multi-adjustment profiles. Usable as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used with stop end fixture 23/40.
StarTec ST multi-purpose panel AL 17 21-212-46 1,01 52,2 StarTec StarTec panel with multi-adjustment profiles. Usable as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used with stop end fixture 23/40.
StarTec Foundation tape 29-307-50 20,0 StarTec Galvanized. Hole spacing 50 mm; hole Ø 16 mm, 50 m m. Adm. tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioners as bottom anchoring when panels are assembled in horizontal position.
StarTec Tensioner AS/ST for foundation tape 29-307-70 1,4 StarTec Galvanized. Connects the foundation tape to AluStar or StarTec panels and serves as bottom anchoring when panels are assembled in horizontal position. Two tensioners are required per anchoring position.
StarTec Trolley for foundation tape 29-307-55 21,8 StarTec Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels. -
StarTec ST panel 270/45 with concreting window 21-213-60 1,22 75,0 StarTec Is used to control the pouring process when control is not possible from above.
StarTec ST panel AL 17, 270/45 with filling nozzle 21-213-55 1,22 73,0 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle 29-914-50 19,0 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle 29-207-60 3,8 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle 29-207-50 7,2 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle 62-031-55 0,1 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec AS radius panel 21-500-00 0,41 38,9 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel 21-500-10 0,54 42,7 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel 21-500-20 0,68 50,0 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel 21-500-40 0,20 21,1 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel 21-500-50 0,27 23,0 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel 21-500-60 0,34 26,4 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS tensioning bow 21-500-95 5,4 StarTec Takes up the anchor load when forming polygonal constructions with radius panels.
StarTec ST inside corner 21-251-00 1,65 87,0 StarTec For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet.
StarTec ST inside corner 21-251-05 1,35 69,5 StarTec For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet.
StarTec ST inside corner 21-251-35 0,68 38,0 StarTec For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet.
StarTec ST inside corner 21-251-65 0,45 27,0 StarTec For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet.
StarTec AS/ST outside corner 22-140-10 15,8 StarTec Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
StarTec AS/ST outside corner 22-140-20 13,0 StarTec Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
StarTec AS/ST outside corner 22-140-30 6,8 StarTec Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
StarTec AS/ST outside corner 22-140-40 4,8 StarTec Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
StarTec Outside corner Alu(minium) 22-140-25 0,27 16,1 StarTec Aluminium. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with ST panels and AS assembly locks a fast and tight outside corner assembly for 90° angles.
StarTec Outside corner Alu(minium) 22-140-35 0,14 8,4 StarTec Aluminium. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with ST panels and AS assembly locks a fast and tight outside corner assembly for 90° angles.
StarTec AS hinged inside corner 21-270-20 1,98 125,0 StarTec Steel construction with steel sheeting. Side length 30 cm. Adjustable angle 60°-180°.
StarTec AS hinged inside corner 21-270-00 1,62 73,0 StarTec Steel construction with steel sheeting. Side length 30 cm. Adjustable angle 60°-180°.
StarTec AS hinged inside corner 21-270-10 0,81 37,0 StarTec Steel construction with steel sheeting. Side length 30 cm. Adjustable angle 60°-180°.
StarTec AS hinged outside corner 21-280-20 0,49 62,5 StarTec Steel construction with steel sheeting. Side length 7,5 cm. Adjustable angle 60°-180°.
StarTec AS hinged outside corner 21-280-00 0,40 45,0 StarTec Steel construction with steel sheeting. Side length 7,5 cm. Adjustable angle 60°-180°.
StarTec AS hinged outside corner 21-280-10 0,20 22,0 StarTec Steel construction with steel sheeting. Side length 7,5 cm. Adjustable angle 60°-180°.
StarTec ST stripping corner 21-262-05 1,65 172,0 StarTec Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17,5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
StarTec ST stripping corner 21-262-10 1,35 142,2 StarTec Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17,5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
StarTec ST stripping corner 21-262-30 0,68 78,2 StarTec Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17,5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
StarTec Adhesive tape, red 41-912-10 0,8 StarTec Not shown. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated. -
StarTec Stripping support 29-306-30 5,0 StarTec The stripping support is used to easily activate the stripping corner from above. Use a power screwdriver, a ratchet wrench or a spanner to activate the stripping support. The tools must have SW 27 or 30 or 36.
StarTec AS assembly lock 29-205-00 2,0 StarTec Galvanized. Tightly connects and aligns AluStar and StarTec panels. Clamping length 8 cm.
StarTec Uni-assembly lock 29-400-85 3,6 StarTec Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
StarTec Uni-assembly lock 29-400-90 3,9 StarTec Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
StarTec Combi-lock with coupling 29-804-60 3,7 StarTec Galvanized. Is used to attach the push-pull props at the panel joint of the AluStar, StarTec, Mammut and Mammut 350 wall formwork. Clamping length 8, 10 and 12 cm.
StarTec Flange screw 29-401-10 1,1 StarTec Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
StarTec Flange screw 29-401-12 1,2 StarTec Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
StarTec ST aluminium filler 21-270-60 0,14 7,9 StarTec Aluminium with high-quality annealed powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler.
StarTec ST aluminium filler 21-270-65 0,07 4,2 StarTec Aluminium with high-quality annealed powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler.
StarTec ST compensation plate 21-300-20 0,60 30,0 StarTec Steel construction with steel sheeting. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
StarTec ST compensation plate 21-300-30 0,30 15,0 StarTec Steel construction with steel sheeting. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
StarTec AS timber profile 29-200-03 5,5 StarTec Timber profile with groove. To support job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face; is attached to the AS/ST-panels with 2 AS-assembly locks. Delivery and weight by pairs.
StarTec AS timber profile 29-200-05 2,7 StarTec Timber profile with groove. To support job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face; is attached to the AS/ST-panels with 2 AS-assembly locks. Delivery and weight by pairs.
StarTec Stop end fixture 23/40 yellow 29-402-85 3,0 StarTec Yellow chromated. To attach alignment rails to the panels when stop ends are formed; or it is used in connection with multi-purpose panels (EcoAs, StarTec) to form outer corners or abutments. It is suited for the frame profiles of EcoAs and AluFix (23 mm) and AluStar/StarTec (40 mm). A flange nut 100 or an articulated flange nut 15/120 are required in addition.
StarTec Stop end bracket 29-105-50 15,4 StarTec Galvanized. Is used to form stop ends. Suitable for frame profile widths 23 mm (EcoAs, AluFix), 40 mm (AluStar, StarTec) and 60 mm (Mammut, Mammut 350). Max. wall thickness 40 cm.
StarTec Stop end bracket 29-105-45 12,2 StarTec Galvanized. Is used to form stop ends. Suitable for frame profile widths 23 mm (EcoAs, AluFix), 40 mm (AluStar, StarTec) and 60 mm (Mammut, Mammut 350). Max. wall thickness 40 cm.
StarTec Plug D20 29-902-63 0,1 StarTec Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec).
StarTec Plug D20 29-902-62 0,1 StarTec Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec).
StarTec M outside corner bracket 23-137-63 12,0 StarTec Galvanized. Provides together with AS/ST panels and flange screw 18 it provides a tight outside corner assembly. Primarily used for concreting heights over 405 cm.
StarTec Corner angle 40/60 29-402-25 9,5 StarTec Galvanized. Side lengths 40 and 60 cm. For inside and outside corners.
StarTec Alignment rail 29-201-73 5,2 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail 29-201-75 10,5 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail 29-400-92 24,8 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail 29-402-50 34,5 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail 29-402-45 124,0 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail 29-402-40 84,0 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail 29-402-38 159,0 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Tie rod DW 15/90 29-900-80 1,3 StarTec Uncoated, not weldable. DW thread Ø 15 mm; adm. load capacity 90 kN (DIN 18216); is used to tie panels of a double-sided formwork.
StarTec Flange nut 100 29-900-20 0,7 StarTec Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 100 mm, SW 27. Admissible load 90 kN.
StarTec Articulated flange nut 15/120 29-900-10 1,8 StarTec Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
StarTec Spanner SW 27 29-800-10 1,8 StarTec Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws.
StarTec Uni-tie claw 29-901-41 1,5 StarTec Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with a frame profile width of 40 mm (AluStar/StarTec) or 60 mm (Mammut/Mammut 350).
StarTec AS crane hook 29-203-89 6,0 StarTec Is used to move panels. Self-locking. Load capacity: 15 kN (1,5 tons). Always 2 crane hooks required per gang. For use and safety check see the Operating Instructions.
StarTec Brace frame 250 29-109-25 27,5 StarTec Galvanized. Aligns and braces the formwork. Available with our without formwork-prop connector. Consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed foot plate. The formwork prop connectors are attached to the formwork with flange screws 18.
StarTec Brace frame 250 29-109-20 31,5 StarTec Galvanized. Aligns and braces the formwork. Available with our without formwork-prop connector. Consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed foot plate. The formwork prop connectors are attached to the formwork with flange screws 18.
StarTec Formwork-prop connector 29-804-85 1,7 StarTec Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
StarTec Double-jointed foot plate 29-402-32 4,0 StarTec Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm.
StarTec Walkway bracket 29-106-00 10,3 StarTec Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
StarTec Walkway bracket 29-106-50 11,8 StarTec Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
StarTec Side railing 29-108-20 12,3 StarTec Galvanized. Is plugged into the walkway bracket.
StarTec Side railing 29-108-30 13,8 StarTec Galvanized. Is plugged into the walkway bracket.
StarTec M profile for extension for guard-railing KLK 29-411-72 7,0 StarTec Painted. Is used to attach the extension for guard-railing KLK and attached to the AluStar and StarTec panels with 2 Uni-assembly locks.
StarTec Guard-railing post 29-106-75 3,7 StarTec Galvanized. Is plugged into the walkway bracket.
StarTec Guard-railing post 29-106-85 4,7 StarTec Galvanized. Is plugged into the walkway bracket.
StarTec Guard-railing post 48 29-106-80 5,5 StarTec Galvanized. With manifold to attach it to the walkway bracket, designed with tube Ø 48 mm to attach tube couplers.
StarTec Guard-railing post 48 29-920-80 5,5 StarTec Galvanized. With manifold to attach it to the walkway bracket, designed with tube Ø 48 mm to attach tube couplers.
StarTec Support guard 800-railing post 29-108-50 10,2 StarTec Galvanized. For the side protection at all MEVA wall formwork systems. Allows the extension for guard-railing KLK 230 and all MEVA guard-railing posts to be plugged in. Guard-railing posts and flange screws 18 must be ordered separately.
StarTec Scaffold tube 29-412-27 18,8 StarTec Galvanized . Is used as hand-rail / mid-rail in combination with guard-railing post 48.
StarTec Scaffold tube 29-412-25 23,5 StarTec Galvanized . Is used as hand-rail / mid-rail in combination with guard-railing post 48.
StarTec Scaffold tube 29-412-28 28,2 StarTec Galvanized . Is used as hand-rail / mid-rail in combination with guard-railing post 48.
StarTec Swivel-joint coupler 48/48 29-412-52 1,2 StarTec Galvanized. Connects 2 scaffold tubes with Ø 48,3 mm at any angle required.
StarTec Transport angle 12 29-305-20 16,5 StarTec Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. We recommend using 2 foldable angles and 2 angles of the rigid type for each stack.
StarTec Transport angle 12 29-305-25 12,7 StarTec Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. We recommend using 2 foldable angles and 2 angles of the rigid type for each stack.
StarTec Safety bolt AS/ST 40-131-10 19,0 StarTec Secures stacked AluStar and StarTec panels. Black bolt for AluStar, grey one for StarTec 270/240.
StarTec Safety bolt AS/ST 40-131-15 19,0 StarTec Secures stacked AluStar and StarTec panels. Black bolt for AluStar, grey one for StarTec 270/240.
StarTec Crane slings 40 29-401-44 21,0 StarTec Four polyester ropes, 5 m long. With 60 cm lifting chain and 4 lifting hooks. Max. load capacity 20 kN (2 tons). Are used to load and unload trucks and move panel stacks near the ground.
StarTec Lifting hook 40 29-401-42 1,6 StarTec Galvanized. Allows any 4-rope crane slings available on site to be used to move the panel stacks. Always use 4 hooks at a time. Max. load capacity 10 kN (1 ton) per lifting hook. Max. weight of a panel stack 2 tons. Refer to the lifting hook Operating Instructions for application and safety test.
Mammut 350 M 350 panel 23-005-05 350/250 8,75 581,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-005-20 350/125 4,38 260,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-005-30 350/100 3,50 215,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-005-35 350/ 75 2,63 174,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-005-45 350/ 55 1,93 139,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-005-50 350/ 50 1,75 131,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-005-55 350/ 45 1,58 121,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-005-70 350/ 30 1,05 93,2 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-005-75 350/ 25 0,88 86,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-006-05 300/250 7,50 464,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-006-20 300/125 3,75 205,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-006-30 300/100 3,00 170,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-006-35 300/ 75 2,25 138,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-006-45 300/ 55 1,65 113,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-006-50 300/ 50 1,50 106,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-006-55 300/ 45 1,35 100,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-006-70 300/ 30 0,90 81,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-006-75 300/ 25 0,75 75,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-007-20 250/125 3,13 184,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-007-30 250/100 2,50 152,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-007-35 250/ 75 1,88 123,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-007-45 250/ 55 1,38 99,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-007-50 250/ 50 1,25 93,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-007-55 250/ 45 1,13 87,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-007-70 250/ 30 0,75 67,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-007-75 250/ 25 0,63 63,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-008-20 125/125 1,56 98,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-008-30 125/100 1,25 81,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-008-35 125/ 75 0,94 65,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-008-45 125/ 55 0,69 52,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-008-50 125/ 50 0,63 49,0 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-008-55 125/ 45 0,56 45,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-008-70 125/ 30 0,38 36,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350 panel 23-008-75 125/ 25 0,31 33,5 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with the alkus AL 20 all-plastic facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-multi purpose panel 23-005-90 2,80 202,0 Mammut 350 RAL 3020 with AL facing and perforated profile to attach the column clamp. Can be used as column panel, for abutments, stop ends, hinged corners etc.
Mammut 350 M 350-multi purpose panel 23-006-90 2,40 166,0 Mammut 350 RAL 3020 with AL facing and perforated profile to attach the column clamp. Can be used as column panel, for abutments, stop ends, hinged corners etc.
Mammut 350 M 350-multi purpose panel 23-007-90 2,00 142,0 Mammut 350 RAL 3020 with AL facing and perforated profile to attach the column clamp. Can be used as column panel, for abutments, stop ends, hinged corners etc.
Mammut 350 M 350-multi purpose panel 23-008-90 1,00 75,0 Mammut 350 RAL 3020 with AL facing and perforated profile to attach the column clamp. Can be used as column panel, for abutments, stop ends, hinged corners etc.
Mammut 350 Column clamp M 350, yellow chromated 29-402-95 7,2 Mammut 350 Outside corners and wall stop ends can be formed using M 350 multi-purpose panels and column clamps M 350. A flange nut must be ordered separately.
Mammut 350 Foundation tape 29-307-50 20,0 Mammut 350 Galvanized. Hole spacing 50 mm, hole Ø 16 mm, 50 m long. Admissible tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioner as a bottom anchoring when panels are assembled in horizontal position.
Mammut 350 Tensioner M for foundation tape 29-307-60 1,5 Mammut 350 Galvanized. Is used to connect the foundation tape to Mammut or Mammut 350 panels. Two tensioners required per anchoring position.
Mammut 350 Trolley for foundation tape 29-307-55 21,8 Mammut 350 Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels. -
Mammut 350 M 350 column panel 350 23-005-96 4,38 325,5 Mammut 350 Colour RAL 3020. With alkus facing and perforated profile for tensioning screws M 350. Can be used to pour columns up to 100 cm wide, pilasters and connections to existing walls. Also usable with hinged corners etc.
Mammut 350 M 350 column panel 350 23-006-96 3,75 270,0 Mammut 350 Colour RAL 3020. With alkus facing and perforated profile for tensioning screws M 350. Can be used to pour columns up to 100 cm wide, pilasters and connections to existing walls. Also usable with hinged corners etc.
Mammut 350 M 350 column panel 350 23-007-96 3,13 227,0 Mammut 350 Colour RAL 3020. With alkus facing and perforated profile for tensioning screws M 350. Can be used to pour columns up to 100 cm wide, pilasters and connections to existing walls. Also usable with hinged corners etc.
Mammut 350 M 350 column panel 350 23-008-96 1,56 120,2 Mammut 350 Colour RAL 3020. With alkus facing and perforated profile for tensioning screws M 350. Can be used to pour columns up to 100 cm wide, pilasters and connections to existing walls. Also usable with hinged corners etc.
Mammut 350 Tensioning screw M 350 29-402-97 1,0 Mammut 350 Galvanized. Connects M 350 column panels. A flange nut 100 or an articulated flange nut 15/120 is also required.
Mammut 350 M 350 aluminium filler 29-300-30 0,18 10,3 Mammut 350 Aluminium with high-quality annealed powder coating. Tie holes. For length adjustments of 5 cm, particularly in corners. 2 or 3 Uni-assembly locks are required or each filler.
Mammut 350 M 350 aluminium filler 29-300-32 0,15 8,8 Mammut 350 Aluminium with high-quality annealed powder coating. Tie holes. For length adjustments of 5 cm, particularly in corners. 2 or 3 Uni-assembly locks are required or each filler.
Mammut 350 M 350 aluminium filler 29-300-35 7,4 Mammut 350 Aluminium with high-quality annealed powder coating. Tie holes. For length adjustments of 5 cm, particularly in corners. 2 or 3 Uni-assembly locks are required or each filler.
Mammut 350 M 350 aluminium filler 29-300-40 3,9 Mammut 350 Aluminium with high-quality annealed powder coating. Tie holes. For length adjustments of 5 cm, particularly in corners. 2 or 3 Uni-assembly locks are required or each filler.
Mammut 350 M 350 timber profile 29-400-02 10,1 Mammut 350 Timber profile with groove. To support job-built fillers of 17 cm or more, or to connect job-built formwork with a 21 mm facing; is attached to standard M 350-panels with 2 or 3 M-assembly locks. Delivery and weight by pairs.
Mammut 350 M 350 inside corner 23-136-40 1,75 120,5 Mammut 350 For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or replaceable steel face.
Mammut 350 M 350 inside corner 23-136-50 1,50 91,5 Mammut 350 For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or replaceable steel face.
Mammut 350 M 350 inside corner 23-136-60 1,25 85,5 Mammut 350 For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or replaceable steel face.
Mammut 350 M 350 inside corner 23-136-70 0,63 44,0 Mammut 350 For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or replaceable steel face.
Mammut 350 M 350 outside corner 350 23-140-30 78,0 Mammut 350 Steel construction, galvanized. Provides together with M 350 panels and M assembly locks a tight and fast outside corner solution for 90° corners.
Mammut 350 M 350 hinged inside corner 350/40 23-137-30 2,73 235,0 Mammut 350 Steel construction with steel sheeting. Side length 40 cm. Adjustable angle 60°-180°.
Mammut 350 M 350 hinged outside corner 350/12,5 23-137-70 0,88 114,6 Mammut 350 Steel construction with steel sheeting. Side length 12,5 cm. Adjustable angle 60°-180°.
Mammut 350 M 350 stripping corner 23-151-00 1,75 187,3 Mammut 350 Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17,5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
Mammut 350 M 350 stripping corner 23-151-10 1,50 159,4 Mammut 350 Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17,5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
Mammut 350 M 350 stripping corner 23-151-20 1,25 138,9 Mammut 350 Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17,5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
Mammut 350 M 350 stripping corner 23-151-30 0,63 79,2 Mammut 350 Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17,5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
Mammut 350 Adhesive tape, red 41-912-10 0,8 Mammut 350 Not shown here. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated. -
Mammut 350 Stripping support 29-306-30 5,0 Mammut 350 The stripping support is used to easily activate the stripping corner from above. Use a power screwdriver, a ratchet wrench or a spanner to activate the stripping support. The tools must have spanner width (SW) 27 or 30 or 36.
Mammut 350 M assembly lock 29-400-71 3,0 Mammut 350 Galvanized. Tightly connects and aligns Mammut and Mammut 350 panels. Clamping length 12 cm. Two M assembly locks are required per panel joint for a panel height up to 300 cm and 3 locks required for a panel height of 350 cm.
Mammut 350 Uni-assembly lock 29-400-85 3,6 Mammut 350 Galvanized. For stepless compensation. Clamping length 22 or 28 cm.
Mammut 350 Uni-assembly lock 29-400-90 3,9 Mammut 350 Galvanized. For stepless compensation. Clamping length 22 or 28 cm.
Mammut 350 Combi-lock with coupling 29-804-60 3,7 Mammut 350 Galvanized. Is used to attach push-pull props at the panel joints of AluStar, StarTec, Mammut and Mammut 350 wall formwork. Clamping lengths 8, 10 and 12 cm.
Mammut 350 Flange screw 29-401-10 1,1 Mammut 350 Galvanized. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
Mammut 350 Flange screw 29-401-12 1,2 Mammut 350 Galvanized. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
Mammut 350 M-Cross stiffener 44 29-401-02 6,3 Mammut 350 Galvanized. Short alignment rail that braces panel joints for crane ganging and to reinforces filler areas.
Mammut 350 M outside corner bracket 23-137-63 12,0 Mammut 350 Galvanized. Provides together with M panels and flange screws 18 a tight outside corner assembly. Primarily used for concreting heights over 425 cm.
Mammut 350 Corner angle 40/60 29-402-25 9,5 Mammut 350 Galvanized. Side lengths 40 and 60 cm. For inside and outside corner.
Mammut 350 Stop end bracket 29-105-50 15,4 Mammut 350 Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2,5‘ - 60/23 for wall thickness up 75 cm (2,5‘) and profile widths of 23 and 60 mm.
Mammut 350 Stop end bracket 29-105-60 20,0 Mammut 350 Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2,5‘ - 60/23 for wall thickness up 75 cm (2,5‘) and profile widths of 23 and 60 mm.
Mammut 350 M column clamp 29-402-70 4,0 Mammut 350 Galvanized. Is used to attach alignment rails to panels when forming stop ends. Suited for 60 mm frame profiles of Mammut and Mammut 350 panels. A flange nut 100 or an articulated flange nut 15/120 is also required. The column clamp is attached to the multi-function profile with a flange screw 18.
Mammut 350 M column clamp 29-402-75 4,0 Mammut 350 Galvanized. Is used to attach alignment rails to panels when forming stop ends. Suited for 60 mm frame profiles of Mammut and Mammut 350 panels. A flange nut 100 or an articulated flange nut 15/120 is also required. The column clamp is attached to the multi-function profile with a flange screw 18.
Mammut 350 Plug D27/30 29-902-61 0,2 Mammut 350 Closes unused Mammut and Mammut 350-tie holes.
Mammut 350 Plug D27/30 29-902-67 0,2 Mammut 350 Closes unused Mammut and Mammut 350-tie holes.
Mammut 350 M alignment rail 29-400-92 24,8 Mammut 350 Galvanized. Are used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Are attached to the formwork with flange screws.
Mammut 350 M alignment rail 29-402-50 34,5 Mammut 350 Galvanized. Are used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Are attached to the formwork with flange screws.
Mammut 350 M alignment rail 29-402-45 124,0 Mammut 350 Galvanized. Are used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Are attached to the formwork with flange screws.
Mammut 350 M alignment rail 29-402-40 84,0 Mammut 350 Galvanized. Are used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Are attached to the formwork with flange screws.
Mammut 350 M alignment rail 29-402-38 159,0 Mammut 350 Galvanized. Are used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Are attached to the formwork with flange screws.
Mammut 350 Tie rod DW 29-900-80 1,3 Mammut 350 Uncoated, not weldable; DIN 18216; with DW thread; admissible load capacity 90 kN (Ø 15 mm) or 160 kN (Ø 20 mm); is used to tie panels of a double-sided formwork.
Mammut 350 Tie rod DW 29-900-97 3,0 Mammut 350 Uncoated, not weldable; DIN 18216; with DW thread; admissible load capacity 90 kN (Ø 15 mm) or 160 kN (Ø 20 mm); is used to tie panels of a double-sided formwork.
Mammut 350 Flange nut 100 29-900-20 0,7 Mammut 350 Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 100 mm, SW 27 mm. Admissible load capacity 90 kN.
Mammut 350 Articulated flange nut 29-900-10 1,8 Mammut 350 Forged, galvanized. DIN 18216. DW thread Ø 15 or 20 mm, plate Ø 120 or 140 mm, max. inclination 10°, SW 27 or 36 mm. Adm. load capacity 90 or 160 kN.
Mammut 350 Articulated flange nut 29-900-05 2,4 Mammut 350 Forged, galvanized. DIN 18216. DW thread Ø 15 or 20 mm, plate Ø 120 or 140 mm, max. inclination 10°, SW 27 or 36 mm. Adm. load capacity 90 or 160 kN.
Mammut 350 Spanner 29-800-10 1,8 Mammut 350 Inset yellow chromated. Spanner width (SW) 27 or 36 mm. To tighten and loosen flange nuts 100, articulated flange nuts 15/120 (or 20/?140 with SW 36) und flange screws.
Mammut 350 Spanner 29-800-15 3,3 Mammut 350 Inset yellow chromated. Spanner width (SW) 27 or 36 mm. To tighten and loosen flange nuts 100, articulated flange nuts 15/120 (or 20/?140 with SW 36) und flange screws.
Mammut 350 Coupling nut 20 29-900-50 0,7 Mammut 350 With DW thread, DIN 18216. Is used to connect tie rods to the anchor loop when length extension is necessary. Ø 20 mm, SW 36. Adm. load capacity 160 kN.
Mammut 350 Drive nut 60 29-900-23 0,5 Mammut 350 Galvanized. DW thread Ø 15 mm, plate Ø 60 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie the formwork to the ground or to a wall connection.
Mammut 350 Hexagonal nut 20 29-900-61 0,5 Mammut 350 Forged, with DW thread, DIN 18216. To tie the anchors in the bottom slab and at the support frame together with a counter plate. Ø 20 mm, SW 36 mm, admissible load capacity 160 kN.
Mammut 350 Counter plate 29-900-35 2,1 Mammut 350 Galvanized. Is required to anchor the support frame together with the appropriate hexagonal nut. Hole Ø 25 mm.
Mammut 350 Uni-tie claw 29-901-41 1,5 Mammut 350 Galvanized. Permits tieing directly above or beside panels. Suited for panels with a frame profile width of 40 mm (AluStar, StarTec) and 60 mm (Mammut, Mammut 350).
Mammut 350 M crane hook 29-401-21 9,6 Mammut 350 To move panels. Self-locking; load capacity 15 kN (1,5 tons). Always 2 crane hooks required per gang. Please refer to the crane hook Operating Instructions for application and safety test.
Mammut 350 Brace frame 250 29-109-25 27,5 Mammut 350 Galvanized. Aligns and braces the formwork. Available with or without formwork-prop connector. Consists of a push-pull prop R 250 (190 - 320 cm), a brace SRL 120 (90 - 150 cm) and a double-jointed footplate. The formwork-prop connectors are attached to the formwork with flange screws 18.
Mammut 350 Brace frame 250 29-109-20 31,5 Mammut 350 Galvanized. Aligns and braces the formwork. Available with or without formwork-prop connector. Consists of a push-pull prop R 250 (190 - 320 cm), a brace SRL 120 (90 - 150 cm) and a double-jointed footplate. The formwork-prop connectors are attached to the formwork with flange screws 18.
Mammut 350 Formwork-prop connector 29-804-85 1,7 Mammut 350 Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
Mammut 350 Walkway bracket 29-106-00 10,3 Mammut 350 Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
Mammut 350 Walkway bracket 29-106-50 11,8 Mammut 350 Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
Mammut 350 Guard-railing post 29-106-75 3,7 Mammut 350 Galvanized. Is plugged into the walkway bracket.
Mammut 350 Guard-railing post 29-106-85 4,7 Mammut 350 Galvanized. Is plugged into the walkway bracket.
Mammut 350 Guard-railing post 48 29-106-80 5,5 Mammut 350 Galvanized. With manifold to attach it to the walkway bracket and with tube Ø 48 mm to attach tube couplers.
Mammut 350 Guard-railing post 48 29-920-80 5,5 Mammut 350 Galvanized. With manifold to attach it to the walkway bracket and with tube Ø 48 mm to attach tube couplers.
Mammut 350 Support 800 guard-railing post 29-108-50 10,2 Mammut 350 Galvanized. For the side protection at all MEVA wall formwork systems. Allows the extension for guard-railing KLK 230 and all MEVA guard-railing posts to be plugged in. Guard-railing posts and flange screws 18 must be ordered separately.
Mammut 350 Side railing 29-108-20 12,3 Mammut 350 Galvanized. Is plugged into the walkway bracket.
Mammut 350 Side railing 29-108-30 13,8 Mammut 350 Galvanized. Is plugged into the walkway bracket.
Mammut 350 Scaffold tube 29-412-23 9,4 Mammut 350 Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
Mammut 350 Scaffold tube 29-412-26 14,1 Mammut 350 Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
Mammut 350 Scaffold tube 29-412-27 18,8 Mammut 350 Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
Mammut 350 Scaffold tube 29-412-25 23,5 Mammut 350 Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
Mammut 350 Scaffold tube 29-412-28 28,2 Mammut 350 Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
Mammut 350 Swivel-joint coupler 48/48 29-412-52 1,2 Mammut 350 Galvanized. Connects 2 scaffold tubes with Ø 48,3 mm at any angle required.
Mammut 350 M profile for extension for guard-railing KLK 29-411-72 7,0 Mammut 350 Painted. Is used to attach the extension for guard-railing KLK and attached to the M-panels with 2 M-assembly locks.
Mammut 350 M safety bolt 40-131-20 22,0 Mammut 350 Secures stacked Mammut and M 350 panels. Black bolt for panels for widths less than 250 cm, grey bolt for panels 250 cm wide or wider.
Mammut 350 M safety bolt 40-131-25 22,0 Mammut 350 Secures stacked Mammut and M 350 panels. Black bolt for panels for widths less than 250 cm, grey bolt for panels 250 cm wide or wider.
Mammut 350 Lifting hook 60 29-401-40 1,7 Mammut 350 Galvanized. Allows any 4-rope crane slings available on site to be used to move panel stacks. Always use 4 hooks at a time. Max. load capacity 10 kN (1 ton) per lifting hook. Max. weight of a panel stack 2 tons. Refer to the lifting hook Operating Instructions for application and safety test.
Mammut 350 Crane slings 60 29-401-45 22,0 Mammut 350 4 polyester ropes, 5 m long. With 60 cm lifting chain and 4 lifting hooks. Max load capacity 20 kN (2 tons). Is used to load and unload trucks and to move panel stacks near the ground.
Mammut 350 Ladder 29-414-50 23,2 Mammut 350 Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
Mammut 350 Ladder 29-414-55 21,1 Mammut 350 Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
Mammut 350 Ladder 29-416-50 17,2 Mammut 350 Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
Mammut 350 Extension ladder 210 29-416-52 19,2 Mammut 350 Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Mammut 350 Extension ladder 210 29-414-60 15,9 Mammut 350 Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Mammut 350 Extension ladder 210 29-416-55 8,5 Mammut 350 Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Mammut 350 Extension ladder 210 29-416-60 7,4 Mammut 350 Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Mammut 350 Extension ladder 210 29-416-62 4,4 Mammut 350 Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Mammut 350 Ladder connector 29-414-70 1,0 Mammut 350 Galvanized. Connects the joint of two extension ladders without the need to hook one ladder into a step of the other.
Mammut 350 Safety cage 29-414-85 27,9 Mammut 350 Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
Mammut 350 Safety cage 29-414-90 12,0 Mammut 350 Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
Mammut 350 Safety cage 29-416-90 8,2 Mammut 350 Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
Mammut 350 Ladder fixture 33/45 29-404-35 6,4 Mammut 350 Galvanized. Is attached to the multi-function profile of the wall formwork panel with a flange screw 18. When used for formwork heights from 350 cm to 450 cm, the STB 450 support frame requires three ladders fixtures 33/45. For formwork heights exceeding 450 cm, contact the MEVA application engineering.
Mammut 350 Cantilever angle 100/125 29-404-25 32,8 Mammut 350 Galvanized. Is attached to the M 350 column panel with 2 transport devices M 24/160 through the transport hole. The CF access platform is secured with the integrated hammer head screw.
Mammut 350 Transport device M 24/160 29-404-30 2,8 Mammut 350 Is used for the vertical transport of M 350 column panels and screwed through the transport holes.
Mammut 350 Folding access platform BKB 125 29-417-10 185,0 Mammut 350 Self-locking ready-made platform with a foldable guard-railing and an overall width of 125 cm; is suspended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stack height 17 cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar, StarTec, Mammut and Mammut 350.
Mammut 350 Folding access platform BKB 125 29-417-20 205,0 Mammut 350 Self-locking ready-made platform with a foldable guard-railing and an overall width of 125 cm; is suspended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stack height 17 cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar, StarTec, Mammut and Mammut 350.
Mammut 350 Folding access platform BKB 125 29-417-00 120,0 Mammut 350 Self-locking ready-made platform with a foldable guard-railing and an overall width of 125 cm; is suspended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stack height 17 cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar, StarTec, Mammut and Mammut 350.
Mammut 350 Folding access platform BKB 125 29-417-30 17,0 Mammut 350 Self-locking ready-made platform with a foldable guard-railing and an overall width of 125 cm; is suspended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stack height 17 cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar, StarTec, Mammut and Mammut 350.
Mammut M panels 73-100-54 300/250 7,50 423,5 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-101-54 300/125 3,75 206,5 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-104-04 300/100 3,00 171,5 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-106-54 300/ 75 2,25 139,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-108-54 300/ 55 1,65 113,5 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-109-04 300/ 50 1,50 107,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-109-54 300/ 45 1,35 101,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-111-04 300/ 30 0,90 74,5 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-111-54 300/ 25 0,75 70,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-112-54 250/250 6,25 365,5 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-113-54 250/125 3,13 184,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-116-04 250/100 2,50 152,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-118-54 250/ 75 1,88 123,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-120-54 250/ 55 1,38 99,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-121-04 250/ 50 1,25 93,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-121-54 250/ 45 1,13 86,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-123-04 250/ 30 0,75 63,5 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-123-54 250/ 25 0,63 63,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-124-54 125/125 1,56 98,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-127-04 125/100 1,25 81,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-129-54 125/ 75 0,94 65,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-131-54 125/ 55 0,69 52,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-132-04 125/ 50 0,63 49,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-132-54 125/ 45 0,56 45,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-134-04 125/ 30 0,38 34,0 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panels 73-134-54 125/ 25 0,31 33,5 Mammut Construction height 12 cm, frame profile width 60 mm. 2 tie holes per panel height 250 cm and 300 cm. The 300 cm high panels have an additional top tie hole which must be used when extending panels. The frames are made of closed steel profiles and are torsion-proof.Thanks to their high-quality annealed powder coating, priming and cavity-sealing, they are corrosion-resistant and easy to clean. The panels are equipped with the alkus AL 20 all-plastic facing or, alternatively, with a coated multi-layer plywood facing of 18 or 21 mm. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut M panel 250/50 AL 20 with concreting window 23-121-10 1,25 106,5 Mammut Not shown. Is used to control the con-cret-ing process when pouring and control is not possible from above.
Mammut M panel 250/50 AL 20 with filling nozzle 23-121-05 1,25 98,5 Mammut Not shown. Is used when concrete can-not be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
Mammut M panel 250/50 AL 20 with filling nozzle 29-914-50 19,0 Mammut Not shown. Is used when concrete can-not be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
Mammut M panel 250/50 AL 20 with filling nozzle 29-207-60 3,8 Mammut Not shown. Is used when concrete can-not be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
Mammut M panel 250/50 AL 20 with filling nozzle 29-207-50 7,2 Mammut Not shown. Is used when concrete can-not be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
Mammut M panel 250/50 AL 20 with filling nozzle 62-031-55 0,1 Mammut Not shown. Is used when concrete can-not be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
Mammut M timber profile 29-400-05 8,7 Mammut Timber profile with groove. To support job-built fillers of 17 cm or more, or to connect job-built formwork with a 21 mm facing; is attached to standard M panels with 2 M assembly locks. Delivery and weight by pairs.
Mammut M timber profile 29-400-15 7,3 Mammut Timber profile with groove. To support job-built fillers of 17 cm or more, or to connect job-built formwork with a 21 mm facing; is attached to standard M panels with 2 M assembly locks. Delivery and weight by pairs.
Mammut M timber profile 29-400-17 3,6 Mammut Timber profile with groove. To support job-built fillers of 17 cm or more, or to connect job-built formwork with a 21 mm facing; is attached to standard M panels with 2 M assembly locks. Delivery and weight by pairs.
Mammut M inside corner 73-136-00 1,50 120,0 Mammut For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet. The frame and steel sheet primed, frame also with a high-quality annealed powder coating and cavity-sealed.
Mammut M inside corner 73-136-10 1,25 102,5 Mammut For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet. The frame and steel sheet primed, frame also with a high-quality annealed powder coating and cavity-sealed.
Mammut M inside corner 73-136-20 0,63 53,6 Mammut For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet. The frame and steel sheet primed, frame also with a high-quality annealed powder coating and cavity-sealed.
Mammut M outside corner 23-140-00 66,6 Mammut Steel construction, galvanized. Provides together with M panels and M assembly a fast and stable outside corner assembly for 90° corners.
Mammut M outside corner 23-140-10 55,2 Mammut Steel construction, galvanized. Provides together with M panels and M assembly a fast and stable outside corner assembly for 90° corners.
Mammut M outside corner 23-140-20 28,5 Mammut Steel construction, galvanized. Provides together with M panels and M assembly a fast and stable outside corner assembly for 90° corners.
Mammut M hinged inside corner 23-137-31 2,40 197,7 Mammut Steel construction with steel sheeting. Primed and cavity-sealed. Side length 40 cm. Adjustable angle 60°-180°.
Mammut M hinged inside corner 23-137-41 2,00 166,0 Mammut Steel construction with steel sheeting. Primed and cavity-sealed. Side length 40 cm. Adjustable angle 60°-180°.
Mammut M hinged inside corner 23-137-51 1,00 85,5 Mammut Steel construction with steel sheeting. Primed and cavity-sealed. Side length 40 cm. Adjustable angle 60°-180°.
Mammut M hinged outside corner 23-137-71 0,76 97,3 Mammut Steel construction with steel sheeting. Primed and cavity-sealed. Side length 12,5 cm. Adjustable angle 60°-180°.
Mammut M hinged outside corner 23-137-81 0,62 81,6 Mammut Steel construction with steel sheeting. Primed and cavity-sealed. Side length 12,5 cm. Adjustable angle 60°-180°.
Mammut M hinged outside corner 23-137-91 0,32 42,0 Mammut Steel construction with steel sheeting. Primed and cavity-sealed. Side length 12,5 cm. Adjustable angle 60°-180°.
SecuritBasic Walkway bracket SB 29-603-10 28,9 SecuritBasic Galvanized. Is attached with 1 flange screw 28 and 1 flange screw 18 to the DW-threaded nuts of the panel’s multi-function profile. The aluminium platform is placed onto the scaffolding bracket and secured with the integrated bolt. Front railing and rear railing posts can be plugged into the scaffold-ing bracket. The flange screws 28 and 18 must be ordered separately.
SecuritBasic Walkway bracket 880 SB 29-603-20 24,6 SecuritBasic Galvanized. Is attached with 1 flange screw 28 and 1 flange screw 18 to the DW-threaded nuts of the panel’s multi-function profile. Is used in inside corner areas only. The aluminium platform is placed onto the scaffolding bracket and secured with the integrated bolt. A front railing post can be plugged into the scaffolding bracket. The flange screws 28 and 18 must be ordered separately.
SecuritBasic Alu(minium) platform M SB 29-600-10 34,5 SecuritBasic Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for Mammut 350 and Mammut panels that are 250 cm and 125 cm wide.
SecuritBasic Alu(minium) platform M SB 29-600-25 17,8 SecuritBasic Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for Mammut 350 and Mammut panels that are 250 cm and 125 cm wide.
SecuritBasic Alu(minium) platform M 1690 SB 29-600-20 24,9 SecuritBasic Inside corner platform. Usable for Mammut 350 and Mammut panels that are 250 cm wide. Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m².
SecuritBasic Alu(minium) platform M 2470 SB with hatch 29-600-15 35,7 SecuritBasic Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for Mammut 350 and Mammut panels that are 250 cm wide.
SecuritBasic Alu(minium) platform ST SB 29-600-40 31,7 SecuritBasic Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for StarTec panels that are 240 cm and 135 cm wide.
SecuritBasic Alu(minium) platform ST SB 29-600-55 18,9 SecuritBasic Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for StarTec panels that are 240 cm and 135 cm wide.
SecuritBasic Alu(minium) platform ST 1890 SB 29-600-47 25,3 SecuritBasic Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Is used as inside corner platform with 2 StarTec panels that are 135 cm wide.
SecuritBasic Alu(minium) platform ST 2370 SB with hatch 29-600-45 32,6 SecuritBasic Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m². Usable for StarTec panels that are 240 cm wide.
SecuritBasic Alu platform outside corners SB 29-600-60 25,3 SecuritBasic Aluminium support construction with slip-free corrugated aluminium sheet. Is placed onto 2 Walkway brackets SB and on the support for guard-railing post OC SB, and locked into place with the integrated safety pin.
SecuritBasic Protection bracket SB 29-602-95 0,6 SecuritBasic The protection bracket SB is plugged into the aluminium platform and attached to the wooden compensation platform with two or more wooden screws, dia = 6 mm. Each compensation bracket requires a minimum of two proctection brackets SB. They must be arranged in diagonal order.
SecuritBasic Support for wooden platform 29-600-95 6,7 SecuritBasic Galvanized. Is used to attach a wooden platform to the walkway bracket SB. The support is screwed to the wooden platform and then secured to the walkway bracket SB with the integrated pin.
SecuritBasic Compensation sheet 29-600-90 25,9 SecuritBasic Bridges gaps up to 135 cm of 75 cm wide.
SecuritBasic Compensation sheet 29-600-92 15,0 SecuritBasic Bridges gaps up to 135 cm of 75 cm wide.
SecuritBasic Compensation covering 570 plugable 29-600-85 7,2 SecuritBasic Pluggable. Bridges gaps up to 40 cm wide.
SecuritBasic Front guard-railing post SB 10 29-601-80 1,2 SecuritBasic Not shown. Galvanized. Is used together with a scaffold tube to create a handrail. The front guard-railing post SB 10 is plugged into a transport hole of a MEVA wall formwork panel and secured with a cotter pin. -
SecuritBasic Front railing post SB retractable 29-601-87 6,2 SecuritBasic Galvanized, dia. 48.3 mm. Is used to install a retractable front railing SB made of scaffold tubes. On the facing side of the platform, one rectractable front railing post is attached with the left retractable support to walkway bracket and the other rectractable front railing post is attached using the right retractable support.
SecuritBasic Support railing post SB, retractable 29-601-96 2,7 SecuritBasic Galvanized. Is used for the retractable front railing SB made of scaffold tubes. The support is attached to the walkway bracket with a bolt and a cotter pin.
SecuritBasic Support railing post SB, retractable 29-601-95 2,7 SecuritBasic Galvanized. Is used for the retractable front railing SB made of scaffold tubes. The support is attached to the walkway bracket with a bolt and a cotter pin.
SecuritBasic Support for guard-railing post IC SB 29-601-92 15,4 SecuritBasic Galvanized. Is used for the attachment of a front guard-railing post. Is attached to the multi-function profile of the wall formwork panel in the inside corner area using a flange screw 18 and a flange screw 28.
SecuritBasic Support for guard-railing post OC SB 29-601-93 13,2 SecuritBasic Galvanized. Is placed onto 2 Walkway brackets SB and secured to the Alu platform outside corners SB with the integrated pin.
SecuritBasic Scaffold tube SB 29-603-55 9,1 SecuritBasic Galvanized. Is used to assemble front railings for SecuritBasic aluminium platforms.
SecuritBasic Scaffold tube SB 29-603-60 8,7 SecuritBasic Galvanized. Is used to assemble front railings for SecuritBasic aluminium platforms.
SecuritBasic Scaffold tube SB 29-603-65 4,6 SecuritBasic Galvanized. Is used to assemble front railings for SecuritBasic aluminium platforms.
SecuritBasic Scaffold tube SB 29-603-70 4,5 SecuritBasic Galvanized. Is used to assemble front railings for SecuritBasic aluminium platforms.
SecuritBasic Swivel-joint coupler 48/48 29-412-52 1,2 SecuritBasic Galvanized. Connects 2 scaffold tubes with 48,3 mm Ø at any angle.
SecuritBasic Rear railing frame M SB 29-602-10 21,7 SecuritBasic Galvanized. Is suspended into the rear railing posts SB. With handrail, mid rail and toe board. Usable for aluminium platforms M 2470 SB and M 1220 SB.
SecuritBasic Rear railing frame M SB 29-602-25 12,2 SecuritBasic Galvanized. Is suspended into the rear railing posts SB. With handrail, mid rail and toe board. Usable for aluminium platforms M 2470 SB and M 1220 SB.
SecuritBasic Rear railing frame ST SB 29-602-40 20,9 SecuritBasic Galvanized. Is suspended into the rear railing posts SB. With handrail, mid rail and toe board. Usable for aluminium platforms ST 2370 SB, ST 1890 SB and ST 1320 SB.
SecuritBasic Rear railing frame ST SB 29-602-45 17,3 SecuritBasic Galvanized. Is suspended into the rear railing posts SB. With handrail, mid rail and toe board. Usable for aluminium platforms ST 2370 SB, ST 1890 SB and ST 1320 SB.
SecuritBasic Rear railing frame ST SB 29-602-55 13,0 SecuritBasic Galvanized. Is suspended into the rear railing posts SB. With handrail, mid rail and toe board. Usable for aluminium platforms ST 2370 SB, ST 1890 SB and ST 1320 SB.
SecuritBasic Rear railing frame 1650 SB 29-602-60 16,6 SecuritBasic Galvanized. Is suspended into the rear railing posts. With handrail, mid rail and toe board. Usable for aluminium platform M 1690 SB when used to bridge gaps.
SecuritBasic Rear railing frame IE 1650 SB 29-602-65 15,5 SecuritBasic Galvanized. With toebord, mid rail and hand rail. Is suspended at the rear railing posts and above all used in inside corner areas.
SecuritBasic Rear railing frame OC SB 29-602-70 27,4 SecuritBasic Galvanized. With toeboard midrail and handrail. Is attached to the rear guard railing post and above all used in outside corner areas.
SecuritBasic Side railing hinged SB wedge 29-601-77 13,0 SecuritBasic Galvanized. Is used for lateral fall-down protection and also secures the compensation sheets. The side railing is attached at the rear railing frame and secured with a wedge. It can be opened towards the rear railing frame when walking from one platform to another.
SecuritBasic Side railing hinged SB tube coupling 29-601-78 13,2 SecuritBasic Galvanized. Is used for lateral fall-down protection and also secures the compensation sheets. Is used for railings made of Ø 48 tubes and opened towards the rear railing frame when walking from one platform to another.
SecuritBasic Telescopic ladder SB 29-603-40 24,2 SecuritBasic Galvanized. For all aluminium platforms with hatch.
SecuritBasic Telescopic ladder SB 29-603-45 19,7 SecuritBasic Galvanized. For all aluminium platforms with hatch.
SecuritBasic Lifting arm SB 29-603-30 28,0 SecuritBasic Galvanized. Is required to save the platform railing from damages when erecting or laying down the formwork (horizontal lift). Can also be used for crane ganging once the formwork is erected (vertical lift). Load capacity per lifting arm: Lifting arm 1700 SB = 1700 kg and Lifting arm 900 SB = 900 kg and. Always two lifting arms per transport unit required.
SecuritBasic Lifting arm SB 29-603-35 25,7 SecuritBasic Galvanized. Is required to save the platform railing from damages when erecting or laying down the formwork (horizontal lift). Can also be used for crane ganging once the formwork is erected (vertical lift). Load capacity per lifting arm: Lifting arm 1700 SB = 1700 kg and Lifting arm 900 SB = 900 kg and. Always two lifting arms per transport unit required.
SecuritBasic Rear railing post SB 29-601-90 4,6 SecuritBasic Galvanized. Dia. 48,3 mm. Is plugged into the walkway bracket and usable for all rear railing frames.
SecuritBasic Ladder fixture railing SB 29-603-75 1,1 SecuritBasic Galvanized. Is required and used to attach the ladder to the handrail of the platform when a formwork unit is height-extended and equipped with platforms on at least two levels.
SecuritBasic Ladder fixture panel SB 29-603-80 5,3 SecuritBasic Galvanized. Is used to attach the ladder to the bottom of the bottom panel. Flange 18 must be ordered separately.
SecuritBasic Flange screw 29-401-10 1,1 SecuritBasic Galvanized. Is used to attach accessories such as brace frames, push-pull props and alignment rails. Length of thread is 18 and 27 cm.
SecuritBasic Flange screw 29-401-12 1,2 SecuritBasic Galvanized. Is used to attach accessories such as brace frames, push-pull props and alignment rails. Length of thread is 18 and 27 cm.
SecuritBasic Crane eye outside corner SB 29-602-97 1,1 SecuritBasic Is used to lift and transport the Alu platform outside corners SB. Is attached to the walkway bracket. One crane eye is required for each bracket.
Rundschalung Radius panels 23-805-05 350/250 8,75 780,0 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-805-30 300/250 7,50 678,0 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-805-70 150/250 3,75 369,5 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-805-20 350/125 4,38 419,0 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-805-40 300/125 3,75 364,0 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-805-80 150/125 1,88 198,0 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-806-05 350/240 8,40 761,0 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-806-30 300/240 7,20 662,5 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-806-70 150/240 3,60 361,0 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-806-20 350/120 4,20 409,5 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-806-40 300/120 3,60 356,0 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung Radius panels 23-806-80 150/120 1,80 193,5 - Support profiles made of steel, galvanized, with steel facing. The integrated spindle-system of the pre-assembled panels allows for a stepless adjustment of the radii, starting with 2.50 m. The Radius panels have a Mammut edge profile for panel connection (12 cm high, 6 cm wide). Amount of tie points per panel height: 3x at panel height 350,2x at panel height 300, 1x at panel height 150. M-assembly locks and Uni-assembly locks as well as the continuous groove guarantee for a stepless, tight and aligned panel connection. The welded-in DW threaded nuts allow for an easy, quick and safe attachment of accessory parts.
Rundschalung RS-assembly lock 23-807-70 4,7 - Galvanized, to tightly connect and align Radius panels. Clamping length is 119 to 205 mm for stepless compensation. 2 assembly locks are required per panel joint for a panel height up to 300 cm; 3 assembly locks are required per panel joint for a panel height up to 350 cm.
Rundschalung M-assembly lock 29-400-71 3,0 - Galvanized, to tightly connect and align Radius panels. Clamping length 12 cm. 2 assembly locks are required per panel joint for a panel height up to 300 cm; 3 assembly locks are required per panel joint for a panel height up to 350 cm.
Rundschalung Combi-lock with coupling 29-804-60 3,7 - Galvanized; to attach the push-pull props at the panel joint of the wall formwork AluStar, StarTec, Mammut, Mammut 350 and Radius. Clamping length 8, 10 and 12 cm.
Rundschalung Flange screw 29-401-10 1,1 - Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm.
Rundschalung Anchor rail RS 23-807-30 20,5 - The rail serves to tie the Radius formwork. Together with the shoe the rail is the support for the tieing. The rail can be moved sidewards on the shoes. The rail transfers the concrete load equally into the panel profiles.
Rundschalung Shoe for anchor rail RS 23-807-25 5,8 - Galvanized. The shoe serves to hold the anchor rail and is plugged into two openings of the panel frame by using two pins which have to be pushed together. The pins stay in place due to a spring. They need to be pushed together until they snap into the openings.
Rundschalung Additional spindle 270-390 RS 23-807-60 1,8 - With a radius greater than 5 m a additional spindle RS 270 - 390 RS is required at the panel joint. The additional spindle is attached at the standard spindle elevation at the plate of the last spindle of the panel with a bolt and a cotter pin.
Rundschalung Screw jack foot RS 23-807-35 2,5 - The screw jack foot is attached to a DW threaded nut of the panel frame by using a flange screw 18. It serves to adjust the Radius panels in height.
Rundschalung Ratchet removable RS 23-807-40 1,5 - The detachable ratchet is used in combination with the spindles of the Radius panels to adjust the different radii. The ratchet fits all spindles of the Radius panels.
Rundschalung Stop-end claw RS 23-807-10 3,1 - Galvanized. To form stop-ends of pouring cycles together with tie rods, stop-end fixtures, alignment rails and flange nuts/articulated flange nuts.
Rundschalung Stop-end fixture RS 23-807-55 1,7 - The stop-end fixture RS is used to form a stop end. It is either attached to the openings of the edge profile of the Radius panel or inserted into the stop-end claw.
Rundschalung Alignment rails 29-400-92 24,8 - Galvanized, for stop ends in combination with the stop-end fixtures RS.
Rundschalung Alignment rails 29-201-75 10,5 - Galvanized, for stop ends in combination with the stop-end fixtures RS.
Rundschalung Magnet RS 360 x 60 mm 23-807-65 5,4 - Not shown. The magnets are used to position the boxouts and are designed in a way that the boxouts can be firmly attached to them. Note that magnets only position the boxouts and make sure the boxouts are so stable that they withstand the fresh concrete pressure without deforming or moving along the facing. -
Rundschalung Chamfer strip magnet RS 29-903-07 4,0 - Nor shown. Is used on steel facing, e.g. on the facing of the Radius circular system. -
Rundschalung Chamfer strip magnet RS 29-903-05 1,6 - Nor shown. Is used on steel facing, e.g. on the facing of the Radius circular system. -
Rundschalung Chamfer strip magnet RS 29-903-02 2,8 - Nor shown. Is used on steel facing, e.g. on the facing of the Radius circular system. -
Rundschalung Chamfer strip magnet RS 29-903-00 0,9 - Nor shown. Is used on steel facing, e.g. on the facing of the Radius circular system. -
Rundschalung Tie rod DW 20/120 29-900-97 3,0 - Uncoated, with DW-thread Ø 20, DIN 18216, not weldable, to tie panels of a double sided formwork; admissible load capacity 160 kN.
Rundschalung Articulated flange nut 20/140 29-900-05 2,4 - Forged, galvanized. DIN 18216. DW thread Ø 20 mm, plate Ø 140 mm, max. inclination 10°, SW 36 mm. Max. load capacity 160 kN. Reduces wear of panel coating.
Rundschalung Spanner SW 36 29-800-15 3,3 - Inset yellow chromated; spanner width 36 mm. To tighten and loosen articulated flange nuts 20/140.
Rundschalung Water stop 20 29-903-30 1,4 - Uncoated, lost part; is used with tie rods DW 20 to produce watertight tie points. Max load capacity: 150 kN.
Rundschalung Brace frame 250 29-109-25 27,5 - Galvanized; to align and brace the formwork. Available with or without formwork-prop connector; it consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed foot plate; the formwork prop connectors are attached to the formwork with flange screws 18.
Rundschalung Brace frame 250 29-109-20 31,5 - Galvanized; to align and brace the formwork. Available with or without formwork-prop connector; it consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed foot plate; the formwork prop connectors are attached to the formwork with flange screws 18.
Rundschalung Formwork-prop connector 29-804-85 1,7 - Galvanized; to connect braces, brace frames and push-pull props (maximum Ø 48 mm) to the DW threaded nuts of the Radius profile by means of a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
Rundschalung Double-jointed foot plate 29-402-32 4,0 - Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm.
Rundschalung Walkway bracket RS 23-807-20 6,7 - Galvanized, pluggable, is used as working and safety scaffold. On the top end the bracket is attached to a DW threaded nut of the frame profile. At the bottom it is secured with the clamps. The planking can be mounted to the brackets. The working width is approx. 90cm. In addition to the bracket a guard-railing post is required.
Rundschalung Guard-railing post 29-106-75 3,7 - Galvanized. Is plugged into the walkway bracket.
Rundschalung Guard-railing post 29-106-85 4,7 - Galvanized. Is plugged into the walkway bracket.
Rundschalung Guard-railing post 48 29-106-80 5,5 - Galvanized. With manifold to attach it to the walkway bracket and with tube Ø 48 mm to attach tube couplers.
Rundschalung Guard-railing post 48 29-920-80 5,5 - Galvanized. With manifold to attach it to the walkway bracket and with tube Ø 48 mm to attach tube couplers.
Circo Circular column formwork Circo 23-600-85 2,36 246,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-80 2,83 264,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-75 3,30 281,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-70 3,77 299,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-65 4,24 318,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-60 4,74 335,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-55 5,18 354,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-50 5,66 370,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-45 6,13 394,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-40 6,60 413,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-30 7,54 451,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-87 0,77 99,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-82 0,94 106,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-77 1,10 113,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-72 1,26 120,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-67 1,41 128,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-62 1,58 135,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-57 1,73 143,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-52 1,88 150,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-47 2,04 159,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-42 2,20 167,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-32 2,51 182,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-88 0,39 47,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-83 0,47 52,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-78 0,55 56,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-73 0,63 72,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-68 0,71 65,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-63 0,79 60,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-58 0,86 74,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-53 0,94 78,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-48 1,02 83,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-43 1,10 87,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Circular column formwork Circo 23-600-33 1,26 96,0 Circo Steel construction with steel sheeting. Primed and cavity-sealed. Consists of 2 semi-circular halves; inside sealed with clear varnish. Accurate height extension owing to special connecting flanges. Can be combined with Mammut panels, e.g. for stop ends; up to Ø 60 cm with M assembly locks; from Ø 65 cm with Circo-Mammut transition assembly locks. Standard height 300 cm, height extensions 50 cm and 100 cm.
Circo Please note 23-600-85 2,36 246,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-80 2,83 264,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-75 3,30 281,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-70 3,77 299,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-65 4,24 318,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-60 4,74 335,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-55 5,18 354,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-50 5,66 370,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-45 6,13 394,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-40 6,60 413,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-30 7,54 451,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-87 0,77 99,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-82 0,94 106,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-77 1,10 113,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-72 1,26 120,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-67 1,41 128,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-62 1,58 135,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-57 1,73 143,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-52 1,88 150,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-47 2,04 159,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-42 2,20 167,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-32 2,51 182,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-88 0,39 47,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-83 0,47 52,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-78 0,55 56,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-73 0,63 72,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-68 0,71 65,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-63 0,79 60,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-58 0,86 74,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-53 0,94 78,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-48 1,02 83,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-43 1,10 87,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo Please note 23-600-33 1,26 96,0 Circo 4 assembly locks are required per linear meter to close the formwork. 6 bolts M16x40 and 6 nuts M16 are required to mount the extension pieces up to Ø 60 cm; for diameters exceeding 65 cm 10 of each are necessary. Extension panels of 50 cm and 100 cm are delivered with the required number of screws. The head bolts 16/90 and cotter pins 4 required for the attachment of the bracing are delivered with the column formwork. Assembly locks and the bracing must be ordered separately.
Circo M assembly lock 29-400-71 3,0 Circo Galvanized. Tightly connects and aligns Circo panels. Clamping length 12 cm. 4 M assembly locks are required per linear meter.
Circo Transition lock Circo-Mammut 29-400-80 3,4 Circo Galvanized. Connects Mammut panels to Circo panels with Ø 65 cm or more to form stop-ends.
Circo Brace frame 250 63-120-49 4,5 Circo Galvanized. Without formwork-prop connector. Aligns and supports the formwork. The brace frame consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate. Is attached with head bolt 16/90 and cotter pin 4 to the Circo semi-circular half (included in the Circo delivery).
Circo Brace frame 250 63-130-00 1,6 Circo Galvanized. Without formwork-prop connector. Aligns and supports the formwork. The brace frame consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate. Is attached with head bolt 16/90 and cotter pin 4 to the Circo semi-circular half (included in the Circo delivery).
Circo Brace frame 250 42-413-50 0,2 Circo Galvanized. Without formwork-prop connector. Aligns and supports the formwork. The brace frame consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate. Is attached with head bolt 16/90 and cotter pin 4 to the Circo semi-circular half (included in the Circo delivery).
Circo Brace frame 250 62-010-04 0,1 Circo Galvanized. Without formwork-prop connector. Aligns and supports the formwork. The brace frame consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate. Is attached with head bolt 16/90 and cotter pin 4 to the Circo semi-circular half (included in the Circo delivery).
Circo Brace frame 250 29-109-25 27,5 Circo Galvanized. Without formwork-prop connector. Aligns and supports the formwork. The brace frame consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate. Is attached with head bolt 16/90 and cotter pin 4 to the Circo semi-circular half (included in the Circo delivery).
Circo Push-pull prop R 29-109-40 (135-200) 11,0 Circo Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
Circo Push-pull prop R 29-109-60 (190-320) 18,5 Circo Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
Circo Push-pull prop R 29-109-80 (340-520) 35,0 Circo Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
Circo Push-pull prop R 29-109-85 (510-760) 68,0 Circo Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
Circo Brace SRL 29-108-80 (90-150) 8,3 Circo Galvanized. Guarantees tensile and compression strength. Consists of a right and left-hand spindle as well as a revolving central part. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
Circo Brace SRL 29-108-90 (120-220) 11,5 Circo Galvanized. Guarantees tensile and compression strength. Consists of a right and left-hand spindle as well as a revolving central part. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
Circo Circo platform 29-415-10 87,0 Circo Access platform with foldable guard-railing; galvanized steel frame covered with non-slipping aluminium. Load capacity 2 kN/m². Is attached to a semi-circular half of the Circo column formwork with 2 Circo scaffolding brackets. Material required for a complete platform: 1 Circo platform, 2 Circo scaffolding brackets, 4 flange screws, 2 Circo railings.
Circo Circo scaffolding bracket 29-415-20 17,0 Circo Galvanized. Is attached to the Circo circular column formwork with 2 flange screws and with an integrated hammerhead screw to the Circo platform. The flange screws must be ordered separately. 2 Circo scaffolding brackets are required per platform.
Circo Circo railing tube 29-415-25 4,5 Circo Not shown. Galvanized. is attached with 2 integrated bolts to the guard-railing of the Circo platform when used as front railing. 2 tubes are required per platform. -
Circo Flange screw 29-401-10 1,1 Circo Galvanized. DW thread Ø 15 mm. Is used to attachthe Circo scaffolding brackets to a semi-circular column half. Length of thread 18 cm or 27 cm.
Circo Flange screw 29-401-12 1,2 Circo Galvanized. DW thread Ø 15 mm. Is used to attachthe Circo scaffolding brackets to a semi-circular column half. Length of thread 18 cm or 27 cm.
Circo Ladder 29-414-50 23,2 Circo Galvanized. Is hooked into the Circo access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
Circo Ladder 29-414-55 21,1 Circo Galvanized. Is hooked into the Circo access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
Circo Ladder 29-416-50 17,2 Circo Galvanized. Is hooked into the Circo access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
Circo Extension ladder 210 29-416-52 19,2 Circo Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Circo Extension ladder 210 29-414-60 15,9 Circo Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Circo Extension ladder 210 29-416-55 8,5 Circo Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Circo Extension ladder 210 29-416-60 7,4 Circo Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Circo Extension ladder 210 29-416-62 4,4 Circo Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
Circo Ladder connector 29-414-70 1,0 Circo Galvanized. Connects the joint of two extension ladders without the need to hook one ladder into a step of the other.
Circo Safety cage 29-414-85 27,9 Circo Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
Circo Safety cage 29-414-90 12,0 Circo Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
Circo Safety cage 29-416-90 8,2 Circo Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
Circo Ladder fixture 29-415-45 16,0 Circo Galvanized. Use the two provided screws to attach the ladder fixture to the push-pull prop connector.
Circo Suspension bracket for extension ladders 29-415-50 2,6 Circo Galvanized. The suspension bracket is connected to the platform planking and the extension ladder 270 is screwed to the suspension bracket on both sides of the suspension bracket. Screws are provided.
CaroFalt CF column formwork 23-603-10 360 2,16 203,0 CaroFalt Construction height 12 cm, frame profile width 40 mm.The panels frames are made of closed steel profiles and are torsion-proof, corrosion-resistant. Their high-quality annealed powder coating, priming and cavity-sealing makes them corrosion-resistant and easy to clean. coating. The panels are equipped with alkus AL 20 all-plastic facing. AS assembly locks guarantee a stepless, tight and perfectly aligned connection of stacked panels. Multi-function profiles allow for an easy, fast and safe attachment of accessories. Column cross sections are possible from 20 cm to 60 cm in increments of 5 cm. The panels are assembled like a windmill and tied with CF spanners across the corners.
CaroFalt CF column formwork 23-603-20 270 1,62 152,5 CaroFalt Construction height 12 cm, frame profile width 40 mm.The panels frames are made of closed steel profiles and are torsion-proof, corrosion-resistant. Their high-quality annealed powder coating, priming and cavity-sealing makes them corrosion-resistant and easy to clean. coating. The panels are equipped with alkus AL 20 all-plastic facing. AS assembly locks guarantee a stepless, tight and perfectly aligned connection of stacked panels. Multi-function profiles allow for an easy, fast and safe attachment of accessories. Column cross sections are possible from 20 cm to 60 cm in increments of 5 cm. The panels are assembled like a windmill and tied with CF spanners across the corners.
CaroFalt CF column formwork 23-603-30 120 0,72 73,5 CaroFalt Construction height 12 cm, frame profile width 40 mm.The panels frames are made of closed steel profiles and are torsion-proof, corrosion-resistant. Their high-quality annealed powder coating, priming and cavity-sealing makes them corrosion-resistant and easy to clean. coating. The panels are equipped with alkus AL 20 all-plastic facing. AS assembly locks guarantee a stepless, tight and perfectly aligned connection of stacked panels. Multi-function profiles allow for an easy, fast and safe attachment of accessories. Column cross sections are possible from 20 cm to 60 cm in increments of 5 cm. The panels are assembled like a windmill and tied with CF spanners across the corners.
CaroFalt CF column formwork 23-603-40 60 0,36 40,0 CaroFalt Construction height 12 cm, frame profile width 40 mm.The panels frames are made of closed steel profiles and are torsion-proof, corrosion-resistant. Their high-quality annealed powder coating, priming and cavity-sealing makes them corrosion-resistant and easy to clean. coating. The panels are equipped with alkus AL 20 all-plastic facing. AS assembly locks guarantee a stepless, tight and perfectly aligned connection of stacked panels. Multi-function profiles allow for an easy, fast and safe attachment of accessories. Column cross sections are possible from 20 cm to 60 cm in increments of 5 cm. The panels are assembled like a windmill and tied with CF spanners across the corners.
CaroFalt CF spanner 29-413-65 4,6 CaroFalt Galvanized. Is used to open and close the CaroFalt. The required quantity depends on the panel height (h): 6 for h 360 cm, 4 for h 270 cm, 2 for h 120 cm, 1 for h 60 cm.
CaroFalt Flange screw 18 29-401-10 1,1 CaroFalt Galvanized. DW thread Ø 15 mm. Is used to attach accessories such as brace frames, push-pull props, CF brackets, CF-ladder fixtures, etc. Length of thread 18 cm.
CaroFalt AS assembly lock 29-205-00 2,0 CaroFalt Galvanized. Tightly connects and aligns CaroFalt panels. Clamping length 8 cm. 2 AS assembly locks are required per panel joint.
CaroFalt Chamfer strip 15/15 29-902-90 0,5 CaroFalt PVC; with perforated strip. Length 2,50 m.
CaroFalt Brace frame 250 29-109-25 27,5 CaroFalt Galvanized. Available with or without formwork-prop connector. Aligns and supports the formwork. The brace frame consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate. The formwork-prop connectors are attached to the formwork with flange screws 18.
CaroFalt Brace frame 250 29-109-20 31,5 CaroFalt Galvanized. Available with or without formwork-prop connector. Aligns and supports the formwork. The brace frame consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate. The formwork-prop connectors are attached to the formwork with flange screws 18.
CaroFalt Formwork-prop connector 29-804-85 1,7 CaroFalt Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
CaroFalt Push-pull prop R 29-109-40 (135-200) 11,0 CaroFalt Galvanized. Guarantees tensile and compression strength. Aligns and supports wall formwork. The footplate and formwork-prop connector must be ordered separately.
CaroFalt Push-pull prop R 29-109-60 (190-320) 18,5 CaroFalt Galvanized. Guarantees tensile and compression strength. Aligns and supports wall formwork. The footplate and formwork-prop connector must be ordered separately.
CaroFalt Push-pull prop R 29-109-80 (340-520) 35,0 CaroFalt Galvanized. Guarantees tensile and compression strength. Aligns and supports wall formwork. The footplate and formwork-prop connector must be ordered separately.
CaroFalt Push-pull prop R 29-109-85 (510-760) 68,0 CaroFalt Galvanized. Guarantees tensile and compression strength. Aligns and supports wall formwork. The footplate and formwork-prop connector must be ordered separately.
CaroFalt Brace SRL 29-108-80 (90-150) 8,3 CaroFalt Galvanized. Guarantees tensile and compression strength. Consists of a right and left-hand spindle as well as a revolving central part. Is used to align and support wall formwork. The footplate and the formwork-prop connector must be ordered separately.
CaroFalt Brace SRL 29-108-90 (120-220) 11,5 CaroFalt Galvanized. Guarantees tensile and compression strength. Consists of a right and left-hand spindle as well as a revolving central part. Is used to align and support wall formwork. The footplate and the formwork-prop connector must be ordered separately.
CaroFalt Double-jointed foot plate 29-402-32 4,0 CaroFalt Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm.
CaroFalt Head bolt 16/90 42-413-50 0,2 CaroFalt Galvanized. Is used to attach push-pull props and braces to foot plates and formwork-prop connectors.
CaroFalt Cotter pin 4 62-010-04 0,1 CaroFalt Galvanized. Locks the head bolt.
CaroFalt Linch pin 62-010-03 0,1 CaroFalt Not shown. Galvanized. Locks the head bolt. -
CaroFalt CF access platform 29-414-10 106,5 CaroFalt With pluggable guard-railing; galvanized steel frame covered with non-slipping aluminium. Load capacity 2 kN/m². Is attached to the CF column panels with a CF scaffold bracket and a CF cantilever angle.
CaroFalt CF scaffold bracket 29-414-15 9,5 CaroFalt Galvanized. Connects the CaroFalt and the CF access platform. Is attached to the CF column panel with a flange screw 18 and a CF transport device 130 through the transport hole. The CF access platform is attached with the integrated hammerhead screw.
CaroFalt CF cantilever angle 29-414-20 14,5 CaroFalt Galvanized. Is attached to the CF column panel with CF transport device 130 through the transport hole. The CF access platform is secured with the integrated hammerhead screw.
CaroFalt CF front railing 29-414-25 11,0 CaroFalt Galvanized. Is plugged into the CF-access platform.
CaroFalt Ladder 29-414-50 23,2 CaroFalt Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
CaroFalt Ladder 29-414-55 21,1 CaroFalt Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
CaroFalt Ladder 29-416-50 17,2 CaroFalt Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
CaroFalt Extension ladder 210 29-416-52 19,2 CaroFalt Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the CF-ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
CaroFalt Extension ladder 210 29-414-60 15,9 CaroFalt Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the CF-ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
CaroFalt Extension ladder 210 29-416-55 8,5 CaroFalt Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the CF-ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
CaroFalt Extension ladder 210 29-416-60 7,4 CaroFalt Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the CF-ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
CaroFalt Extension ladder 210 29-416-62 4,4 CaroFalt Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the CF-ladder fixture. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
CaroFalt Ladder connector 29-414-70 1,0 CaroFalt Galvanized. Connects the joint of two extension ladders without the need to hook one ladder into a step of the other.
CaroFalt Safety cage 29-414-85 27,9 CaroFalt Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
CaroFalt Safety cage 29-414-90 12,0 CaroFalt Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
CaroFalt Safety cage 29-416-90 8,2 CaroFalt Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
CaroFalt CF ladder fixture 29-414-65 5,0 CaroFalt Galvanized. Is attached to a multi-function profile of the CaroFalt with a flange screw 18. Two CF-ladder fixtures are required for heights from 3,60 m, three for heights from 4,80 m.
CaroFalt CF transport wheel 29-413-50 14,9 CaroFalt Galvanized. Hard rubber wheels with little rolling friction. For the horizontal transport of closed column formwork. Load capacity 600 kg per wheel. Spindle range 7,5 cm. Always 4 wheels are required for a formwork unit. May be used up to a formwork height of 3,60 m. For use and safety check see the Operating Instructions.
CaroFalt CF steel sheet for sliding 29-413-60 3,2 CaroFalt Galvanized. Protects the alkus facing and the panel frames from damage when opening and closing the formwork. Is attached to tranport holes and secured with clip pins. Four steel sheets are required per column from. Delivery includes clip pins.
CaroFalt CF transport device 130 29-413-70 1,7 CaroFalt For the vertical transport of the CF-column formwork. Is bolted. Load capacity 12 kN (1,2 tons). Always 3 CF transport devices are required per column unit. For use and safety test of the CF transport device refer to its Operating Instructions.
STB Support frame STB 300 29-402-62 169,0 STB Sturdy steel construction, coated: Height 2,20 or 3,00 m. Is used to brace single-sided wall formwork up to a pouring heights of 330 cm. A spindle allows for the precise plumb-vertical positioning of the formwork.
STB Base extension 300/200 29-402-64 53,2 STB Coated. Supplements the support frame STB 300 for special applications, which require a detailed planning and static calculation by MEVA engineers.
STB Cross beam 300 29-403-05 60,0 STB Coated. Links formwork in vertical position and support frames with flange screws. Allows to build transport units. Welded-in nuts guarantee a support frame spacing adapted to MEVA wall formwork systems.
STB M-Cross stiffener 44 29-401-02 6,3 STB Galvanized. In connection with support frames STB 300 it is used as a tie-beam to transfer the load from the support frame into the anchoring loops.
STB Support frame STB 450 29-406-00 822,0 STB Sturdy steel construction, coated, height 4,50 m. To brace single-sided wall formwork up to a pouring height of 5,00 m. A spindle allows to set the formwork plumb.
STB Support frame STB 450 for mobile unit 29-406-02 828,0 STB Not shown. The support frame STB 450 for mobile unit is equipped with an additional steel plate so it can be distinguished from other support frames. The steel plate is in signal colour. -
STB Height extension connector STB 450 29-406-90 13,2 STB Not shown. Coated. Connects the support frame STB 450 with the STB-height extension 150 and the height extensions to each other. -
STB STB-height extension 150 29-406-10 119,0 STB Coated. Height 1,50 m. Extends support frame STB 450 by 1,50 m (one or several times). Pouring heights of 7,50 m (or higher) also require Triplex SB braces and base extensions. The reuqired connecting devices are included in the delivery.
STB STB-base extension 29-406-20 40,0 STB Coated. Is used for the one-time or -multiple backward extension of support frame STB 450 and for the attachment of Triplex SB braces.
STB Scaffold tube 29-412-23 9,4 STB Galvanized. Is used to reinforce large-size units of support frames or climbing systems for transport.
STB Scaffold tube 29-412-26 14,1 STB Galvanized. Is used to reinforce large-size units of support frames or climbing systems for transport.
STB Scaffold tube 29-412-27 18,8 STB Galvanized. Is used to reinforce large-size units of support frames or climbing systems for transport.
STB Scaffold tube 29-412-25 23,5 STB Galvanized. Is used to reinforce large-size units of support frames or climbing systems for transport.
STB Scaffold tube 29-412-28 28,2 STB Galvanized. Is used to reinforce large-size units of support frames or climbing systems for transport.
STB Rigid coupler 48/48 29-412-50 1,1 STB Galvanized. Connects 2 scaffold tubes with Ø 48,3 mm at an angle of 90°. SW 22.
STB Swivel-joint coupler 48/48 29-412-52 1,2 STB Galvanized. Connect 2 scaffold tubes with Ø 48,3 mm at any angle required.
STB Bolt-on coupler 48/M14 40-080-70 0,6 STB Galvanized. Permits the attachment of scaffold tubes with Ø 48,3 mm to support frames, climbing brackets, etc.
STB Joint coupler 48/48 SW 22 29-412-55 1,4 STB Galvanized. Is used together with a tube connector 48 to attach scaffold tubes with Ø 48,3 mm at tube joints.
STB Tube connector 48 29-412-57 1,1 STB Galvanized. Is required for joint coupler 48/48 and used to reinforce the joint of 2 tubes.
STB Triplex SB 29-407-15 71,0 STB Galvanized. Provides together with the base extension the required additional support for concreting heights of 7,50 m (or higher). For details see the Triplex Technical Instruction Manual.
STB Triplex SB 29-407-17 71,0 STB Galvanized. Provides together with the base extension the required additional support for concreting heights of 7,50 m (or higher). For details see the Triplex Technical Instruction Manual.
STB Triplex SB 29-407-30 15,0 STB Galvanized. Provides together with the base extension the required additional support for concreting heights of 7,50 m (or higher). For details see the Triplex Technical Instruction Manual.
STB Triplex SB 29-407-35 22,0 STB Galvanized. Provides together with the base extension the required additional support for concreting heights of 7,50 m (or higher). For details see the Triplex Technical Instruction Manual.
STB Triplex SB 29-407-40 37,0 STB Galvanized. Provides together with the base extension the required additional support for concreting heights of 7,50 m (or higher). For details see the Triplex Technical Instruction Manual.
STB Triplex SB 29-407-45 52,0 STB Galvanized. Provides together with the base extension the required additional support for concreting heights of 7,50 m (or higher). For details see the Triplex Technical Instruction Manual.
STB Triplex SB 29-407-25 19,0 STB Galvanized. Provides together with the base extension the required additional support for concreting heights of 7,50 m (or higher). For details see the Triplex Technical Instruction Manual.
STB Triplex SB 29-407-20 19,0 STB Galvanized. Provides together with the base extension the required additional support for concreting heights of 7,50 m (or higher). For details see the Triplex Technical Instruction Manual.
STB Fixing screw 35/DW15 29-401-20 0,6 STB Galvanized. Is used to attach a support frame to the tie holes of panels in horizontal position. A flange nut 100 or an articulated flange nut 15/120 is required.
STB Stop end bracket SB 110 29-406-40 198,0 STB Coated. Is used to form stop ends when the pouring height exceeds 4,00 m. For max. wall thickness 1,10 m. A clamping device for stop end brackets SB 110 (or a tie rod DW 15 with a length of 45 cm) is required to attach the stop end bracket SB 110 to the support frame.
STB Clamping device for stop end bracket SB 110 29-406-60 1,4 STB Coated. Is used to connect the stop end bracket SB 110 to the support frame. A flange nut 100 or an articulated flange nut 15/120 is also required.
STB M alignment rail 29-402-38 159,0 STB Galvanized. Are used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Are attached to the formwork with flange screws.
STB M alignment rail 29-402-40 84,0 STB Galvanized. Are used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Are attached to the formwork with flange screws.
STB Flange screw 29-401-10 1,1 STB Galvanized. DW thread Ø 15 mm. Is used to attach accessories to the multi-function profiles of the panels, e.g. alignment rails, cross braces, cross beams 300, formwork-prop connectors, etc.
STB Flange screw 29-401-12 1,2 STB Galvanized. DW thread Ø 15 mm. Is used to attach accessories to the multi-function profiles of the panels, e.g. alignment rails, cross braces, cross beams 300, formwork-prop connectors, etc.
STB Cross brace STB 29-406-70 92,0 STB Coated. Supports the inside corner area of single-sided wall formwork. Dimensions 137 x 137 cm. Welded-in DW-threaded nuts to attach 2 or 3 support frames STB 300 or STB 450. Flange screws are required to attach the cross brace to the formwork and the support frame to the cross brace.
STB Walkway bracket 29-106-00 10,3 STB Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
STB Walkway bracket 29-106-50 11,8 STB Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
STB Guard-railing post 29-106-75 3,7 STB Galvanized. Is plugged into the walkway bracket.
STB Guard-railing post 29-106-85 4,7 STB Galvanized. Is plugged into the walkway bracket.
STB Side railing 29-108-20 12,3 STB Galvanized. Is plugged into the walkway bracket.
STB Side railing 29-108-30 13,8 STB Galvanized. Is plugged into the walkway bracket.
STB Ladder 29-414-50 23,2 STB Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
STB Ladder 29-414-55 21,1 STB Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
STB Ladder 29-416-50 17,2 STB Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
STB Extension ladder 210 29-416-52 19,2 STB Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
STB Extension ladder 210 29-414-60 15,9 STB Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
STB Extension ladder 210 29-416-55 8,5 STB Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
STB Extension ladder 210 29-416-60 7,4 STB Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
STB Extension ladder 210 29-416-62 4,4 STB Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. The extension ladder must be secured with the Ladder fixture 33/45. An additional extension in increments of 30 cm is achieved by hooking an extension ladder into the appropriate step.
STB Ladder fixture 33/45 29-404-35 6,4 STB Galvanized. Is attached to the multi-function profile of the wall formwork panel with a flange screw 18. When used for formwork heights from 350 cm to 450 cm, the STB 450 support frame requires three ladders fixtures 33/45. For formwork heights exceeding 450 cm, contact the MEVA application engineering.
STB Ladder connector 29-414-70 1,0 STB Galvanized. Connects the joint of two extension ladders without the need to hook one ladder into a step of the other.
STB Safety cage 29-414-85 27,9 STB Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
STB Safety cage 29-414-90 12,0 STB Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
STB Safety cage 29-416-90 8,2 STB Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
STB Anchor support DW 15 - DW 26,5 29-925-80 1,0 STB Steel, uncoated. Bottom bent by 45°. Supports DW 15, DW 20 and DW 26,5 tie rods.The tie rods are re-usable if PVC sleeves are used. The anchor support is always attached with the integrated adjusting screw.
STB Single anchor DW 29-925-40 0,8 STB Steel, uncoated. Admissible load: DW 15 = 90 kN, DW 20 = 160 kN, DW 26 = 250 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
STB Single anchor DW 29-925-45 1,3 STB Steel, uncoated. Admissible load: DW 15 = 90 kN, DW 20 = 160 kN, DW 26 = 250 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
STB Single anchor DW 29-925-50 2,4 STB Steel, uncoated. Admissible load: DW 15 = 90 kN, DW 20 = 160 kN, DW 26 = 250 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
STB Double anchor DW 29-925-60 1,8 STB Steel, uncoated. Admissible load: DW 15 = 180 kN, DW 20 = 320 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
STB Double anchor DW 29-925-65 2,7 STB Steel, uncoated. Admissible load: DW 15 = 180 kN, DW 20 = 320 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
STB Tie rod DW 29-900-76 0,6 STB Uncoated; not weldable; with DW thread; DIN 18216. To transfer the load from the support frame into the floor slab or foundation Ø in mm. Ø 15: admissible load capacity 90 kN, Ø 20: admissible load capacity 160 kN, Ø 26,5: admissible load capacity 250 kN.
STB Tie rod DW 29-900-80 1,3 STB Uncoated; not weldable; with DW thread; DIN 18216. To transfer the load from the support frame into the floor slab or foundation Ø in mm. Ø 15: admissible load capacity 90 kN, Ø 20: admissible load capacity 160 kN, Ø 26,5: admissible load capacity 250 kN.
STB Tie rod DW 29-900-97 3,0 STB Uncoated; not weldable; with DW thread; DIN 18216. To transfer the load from the support frame into the floor slab or foundation Ø in mm. Ø 15: admissible load capacity 90 kN, Ø 20: admissible load capacity 160 kN, Ø 26,5: admissible load capacity 250 kN.
STB Tie rod DW 29-900-75 3,6 STB Uncoated; not weldable; with DW thread; DIN 18216. To transfer the load from the support frame into the floor slab or foundation Ø in mm. Ø 15: admissible load capacity 90 kN, Ø 20: admissible load capacity 160 kN, Ø 26,5: admissible load capacity 250 kN.
STB Twin channel 29-406-30 148,0 STB Coated. Is used with support frame STB 450 and transfers the load from the support frame into the anchor bars.
STB Twin channel 29-406-35 49,0 STB Coated. Is used with support frame STB 450 and transfers the load from the support frame into the anchor bars.
STB Twin channel 29-406-38 22,5 STB Coated. Is used with support frame STB 450 and transfers the load from the support frame into the anchor bars.
STB Anchor loop 29-001-20 2,4 STB Uncoated, not weldable. With DW thread. DIN 18216. Transfers the load from the support frame into the floor slab or foundation. Adm. load depends on loop diameter. Ø 15 mm: 2 x 90 kN = 180 kN. Ø 20 mm: 2 x 160 kN = 320 kN.
STB Anchor loop 29-001-25 4,5 STB Uncoated, not weldable. With DW thread. DIN 18216. Transfers the load from the support frame into the floor slab or foundation. Adm. load depends on loop diameter. Ø 15 mm: 2 x 90 kN = 180 kN. Ø 20 mm: 2 x 160 kN = 320 kN.
STB Coupling nut 29-900-55 0,4 STB With DW thread; DIN 18216. Connects tie rods to the anchor loop when length extension is necessary. Admissible load in kN and SW in mm: Ø 15 mm (90 kN, SW 30), Ø 20 mm (160 kN, SW 36), Ø 26,5 mm (250 kN, SW 46).
STB Coupling nut 29-900-50 0,7 STB With DW thread; DIN 18216. Connects tie rods to the anchor loop when length extension is necessary. Admissible load in kN and SW in mm: Ø 15 mm (90 kN, SW 30), Ø 20 mm (160 kN, SW 36), Ø 26,5 mm (250 kN, SW 46).
STB Coupling nut 29-900-56 1,4 STB With DW thread; DIN 18216. Connects tie rods to the anchor loop when length extension is necessary. Admissible load in kN and SW in mm: Ø 15 mm (90 kN, SW 30), Ø 20 mm (160 kN, SW 36), Ø 26,5 mm (250 kN, SW 46).
STB Fix anchor 29-926-60 0,5 STB Uncoated. Is used to anchor tie rods in the concrete with anchor supports.
STB Fix anchor 29-926-65 0,9 STB Uncoated. Is used to anchor tie rods in the concrete with anchor supports.
STB Fix anchor 29-926-70 1,9 STB Uncoated. Is used to anchor tie rods in the concrete with anchor supports.
STB Plastic tube 29-902-30 0,4 STB Is used as a plastic sleeve for a tie rod that is to be recovered and re-used. 2 m long.
STB Plastic tube 29-902-28 0,4 STB Is used as a plastic sleeve for a tie rod that is to be recovered and re-used. 2 m long.
STB Plastic tube 29-902-29 0,4 STB Is used as a plastic sleeve for a tie rod that is to be recovered and re-used. 2 m long.
STB Plastic tube 29-902-27 3,8 STB Is used as a plastic sleeve for a tie rod that is to be recovered and re-used. 2 m long.
STB Planing cap DW 29-917-75 1,0 STB Hard foam, 10 cm long, 45° end piece. For DW 15 and DW 20. Is plugged onto the DW tie rod or on a plastic sleeve for one-sided anchoring of support frames STB. Hole depth 5 cm.
STB Spiral anchor DW 15/100 29-921-10 6,1 STB Steel spiral bead, 10 cm long, with styropore core. Is used to attach formwork equipment with tie rods DW 15, e.g. when adjusting the equipment when using push-pull props or the like. Remove the styropore with a 14 mm drill.
STB Adjustable spanner 29-926-95 1,6 STB Not shown. For DW 15, DW 20 and DW 26,5. Is used to loosen and unscrew recoverable tie rods. -
STB Upstand bracket 29-925-10 0,8 STB Adjustment range 100 mm. Is used to brace upstand formwork.
STB Articulated flange nut 29-900-10 1,8 STB Forged, galvanized. DIN 18216. DW thread Ø 15 mm (20 mm). Plate Ø 120 mm (140 mm), max. inclination 10°, SW 27 (36). Max. load capacity 90 kN (160 kN).
STB Articulated flange nut 29-900-05 2,4 STB Forged, galvanized. DIN 18216. DW thread Ø 15 mm (20 mm). Plate Ø 120 mm (140 mm), max. inclination 10°, SW 27 (36). Max. load capacity 90 kN (160 kN).
STB Flange nut 100 29-900-20 0,7 STB Forged; galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 100 mm, SW 27. Max. load capacity 90 kN.
STB Spanner SW 36 29-800-10 1,8 STB Inset yellow chromated; spanner width 36 mm. To tighten and loosen articulated flange nuts 20/140.
STB Spanner SW 36 29-800-15 3,3 STB Inset yellow chromated; spanner width 36 mm. To tighten and loosen articulated flange nuts 20/140.
STB Hexagonal nut 29-900-60 0,2 STB Forged; with DW thread; DIN 18216. To tie the anchors in the bottom slab and at the support frame; is used with a counter plate to increase the pull-out resistance. Admissible load in kN and SW in mm. Ø 15 mm (90 kN, SW 30), Ø 20 mm (160 kN, SW 36), Ø 26,5 mm (250 kN, SW 46).
STB Hexagonal nut 29-900-61 0,5 STB Forged; with DW thread; DIN 18216. To tie the anchors in the bottom slab and at the support frame; is used with a counter plate to increase the pull-out resistance. Admissible load in kN and SW in mm. Ø 15 mm (90 kN, SW 30), Ø 20 mm (160 kN, SW 36), Ø 26,5 mm (250 kN, SW 46).
STB Hexagonal nut 29-900-58 0,5 STB Forged; with DW thread; DIN 18216. To tie the anchors in the bottom slab and at the support frame; is used with a counter plate to increase the pull-out resistance. Admissible load in kN and SW in mm. Ø 15 mm (90 kN, SW 30), Ø 20 mm (160 kN, SW 36), Ø 26,5 mm (250 kN, SW 46).
STB Counter plate 29-900-35 2,1 STB Galvanized. is used to anchor the support frame together with the hexagonal nut. Hole Ø 25 mm or 38 mm.
STB Counter plate 29-900-30 2,1 STB Galvanized. is used to anchor the support frame together with the hexagonal nut. Hole Ø 25 mm or 38 mm.
STB Trolley bracket STB 450 29-406-75 95,0 STB Coated. For swivel-type castors with different load capacities. Is required for mobile formwork units with support frame STB 450.
STB Support bracket STB 450 29-406-80 59,5 STB Coated. For swivel-type castors with different load capacities. Is required for mobile formwork units with support frame STB 450.
STB Adapter for swivel-type castor STB 450 29-406-85 19,0 STB Coated. For swivel-type castors with different load capacities. Is required for mobile formwork units with support frame STB 450 if height exceeds 6 m.
STB Trolley waler 29-403-70 76,0 STB Coated. Is used for a fast support frame transport when a crane cannot be used. The trolley waler is attached to the support frame units. Wheel adapters, trolley spindles and castors are required. Please observe the trolley waler instructions.
STB Wheel adapter for trolley waler 29-403-75 12,0 STB Galvanized. Is used to install swivel-type castors for 2 or 6 tons.
STB Trolley spindle 48/70 29-403-80 7,4 STB Galvanized. Is used to raise or lower the support frame units when attaching the swivel-type castors.
STB Swivel-type castor 2 tons 29-306-50 8,3 STB Suited for the wheel adapter for the troller waler. Load capacity 2 tons; with slide bearing; total height 305 mm; plate size 175 x 140 mm; screw hole spacing 140 x 105 mm; drill hole Ø 14 mm; cantilever 75 mm.
STB Swivel-type castor 6 tons (10 tons) 29-306-75 22,1 STB Load capacity 6 tons; with ball bearing; total height 330 mm; plate size 225 x 200 mm, screw hole spacing 210 x 200 mm, drill hole Ø 18 mm, cantilever 85 mm (load capacity 10 tons; with ball bearing; total height 430 mm; plate size 400 x 300 mm, screw hole spacing 340 x 240 mm, drill hole Ø 26 mm, cantilever 110 mm).
STB Swivel-type castor 6 tons (10 tons) 29-306-90 80,0 STB Load capacity 6 tons; with ball bearing; total height 330 mm; plate size 225 x 200 mm, screw hole spacing 210 x 200 mm, drill hole Ø 18 mm, cantilever 85 mm (load capacity 10 tons; with ball bearing; total height 430 mm; plate size 400 x 300 mm, screw hole spacing 340 x 240 mm, drill hole Ø 26 mm, cantilever 110 mm).
STB Brace bracket SK 150 29-403-50 38,0 STB Coated. Is used to form stop ends for foundation slabs with a max. thickness of 1,50 m. Braces SRL 120 or SRL 170 must be ordered separately.
STB Positioning support SK 29-403-55 4,1 STB Coated. Permits the exact levelling and positioning of stop ends when used with the brace bracket SK 150, even on a sloped surface.
STB Brace SRL 29-108-80 (90-150) 8,3 STB Galvanized. Consists of a right and a left-hand spindle as well as a revolving centre part. The brace is delivered without foot plate and without formwork-prop connector.
STB Brace SRL 29-108-90 (120-220) 11,5 STB Galvanized. Consists of a right and a left-hand spindle as well as a revolving centre part. The brace is delivered without foot plate and without formwork-prop connector.
STB Reversible coupling for push-pull props 29-401-74 2,0 STB To connect braces to vertical alignment rails.
STB Push-pull prop R 29-109-80 (340-520) 35,0 STB Galvanized. Guarantees tensile and compression strength. Aligns and supports wall formwork. The footplate and formwork-prop connector must be ordered separately.
STB Brace bracket 80 29-921-35 11,5 STB Galvanized. Can be used for floor slabs and slab ends up to 80 cm high. Can be inclined by up to +/- 15°. With plastic nail bar. Can be folded for transport.
STB Flange screw 12 29-900-70 0,8 STB Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 12 cm.
STB Double-headed ground nail 25/280 29-800-45 2,0 STB Not shown. Is used to attach brace bracket 80. Double-headed. Is removed from the earth with the extractor. (to be ordered separately). -
STB Extractor for double-headed ground nail 29-800-50 0,8 STB Not shown. Is used to remove the ground nail from the earth together with a lever rod (not supplied). -
STB Pressure gauge 29-915-15 6,4 STB Not shown. Measures tractive force of anchors from 250 to 400 kN. Includes compensating plate for tie rods, with 50 mm hole diameter. -
STB Pressure gauge 29-915-00 6,4 STB Not shown. Measures tractive force of anchors from 250 to 400 kN. Includes compensating plate for tie rods, with 50 mm hole diameter. -
RS/SRL Push-pull prop R 29-109-40 (135-200) 11,0 - Galvanized. Garantee tensile and compression strength. Align and brace wall formwork. Foot plates and formwork-prop-connectors to be ordered separately.
RS/SRL Push-pull prop R 29-109-60 (190-320) 18,5 - Galvanized. Garantee tensile and compression strength. Align and brace wall formwork. Foot plates and formwork-prop-connectors to be ordered separately.
RS/SRL Push-pull prop R 29-109-80 (340-520) 35,0 - Galvanized. Garantee tensile and compression strength. Align and brace wall formwork. Foot plates and formwork-prop-connectors to be ordered separately.
RS/SRL Push-pull prop R 29-109-85 (510-760) 68,0 - Galvanized. Garantee tensile and compression strength. Align and brace wall formwork. Foot plates and formwork-prop-connectors to be ordered separately.
RS/SRL Braces SRL 29-108-80 (90-150) 8,3 - Galvanized. Guarantee tensile and compression strength. With right-hand and left-hand spindle and revolving centre part. Align and brace wall formwork. Foot plates and formwork-prop-connectors to be ordered separately.
RS/SRL Braces SRL 29-108-90 (120-220) 11,5 - Galvanized. Guarantee tensile and compression strength. With right-hand and left-hand spindle and revolving centre part. Align and brace wall formwork. Foot plates and formwork-prop-connectors to be ordered separately.
RS/SRL Braces SRL 29-108-95 (220-290) 16,8 - Galvanized. Guarantee tensile and compression strength. With right-hand and left-hand spindle and revolving centre part. Align and brace wall formwork. Foot plates and formwork-prop-connectors to be ordered separately.
RS/SRL Brace frame 250 29-109-25 27,5 - Galvanized. Aligns and braces the formwork. Available with or without formwork-prop connector. Consists of a push-pull prop R 250 (190-320cm), a brace SRL 120 (90-150cm) and a double-jointed footplate. The formwork-prop connectors are attached to the formwork with flange screws 18.
RS/SRL Brace frame 250 29-109-20 31,5 - Galvanized. Aligns and braces the formwork. Available with or without formwork-prop connector. Consists of a push-pull prop R 250 (190-320cm), a brace SRL 120 (90-150cm) and a double-jointed footplate. The formwork-prop connectors are attached to the formwork with flange screws 18.
RS/SRL Formwork-prop connector 29-804-85 1,7 - Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile (with a flange screw 18). Delivery includes head bolt 16/90 and cotter pin 4.
RS/SRL Flange screw 29-401-10 1,1 - Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
RS/SRL Flange screw 29-401-12 1,2 - Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
RS/SRL E-assembly lock with coupling 29-802-70 1,0 - Galvanized. Is used to attach push-pull props at AluFix and EcoAs panel joints. Clamping length 4,6 cm.
RS/SRL Combi-lock with coupling 29-804-60 3,7 - Galvanized. Is used to attach push-pull props at the panel joints of AluStar, StarTec, Mammut and Mammut 350 wall formwork. Clamping length 8, 10 and 12 cm.
RS/SRL Universal joint connector 76/135 29-804-81 1,4 - Galvanized. With head bolt 16/90 and cotter pin 4. Is used to attach push-pull props to vertical or horizontal panel joints A Combi-lock with coupling is also required. Typical application in folding shaft formwork.
RS/SRL Reversible coupling for push-pull props 29-401-74 2,0 - Galvanized. Is used to connect push-pull props or braces to vertical alignment rails. A flange nut is also required.
RS/SRL Articulated foot plate 29-802-48 2,3 - Galvanized. With head bolt 16/90 and cotter pin 4. For push-pull props and braces of up to Ø 57 mm.
RS/SRL Double-jointed foot plate 29-402-32 4,0 - Galvanized. With head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm.
RS/SRL Head bolt 16/90 42-413-50 0,2 - Galvanized. Is used to attach push-pull props or braces to foot plates and formwork-prop connectors.
RS/SRL Cotter pin 4 62-010-04 0,1 - Galvanized. Locks the head bolt.
Triplex Triplex R 29-407-90 63,0 Triplex Galvanized. Braces and aligns wall and column formwork exceeding 6,00 m. Is delivered in modules and assembled on site to the required length. The Triplex R 300 with right-hand thread is provided with a foot plate 48. The formwork connector (formwork-prop connector or Combi-lock with coupling) must be ordered separately.
Triplex Triplex R 29-407-93 59,0 Triplex Galvanized. Braces and aligns wall and column formwork exceeding 6,00 m. Is delivered in modules and assembled on site to the required length. The Triplex R 300 with right-hand thread is provided with a foot plate 48. The formwork connector (formwork-prop connector or Combi-lock with coupling) must be ordered separately.
Triplex Triplex intermediate pieces R 29-407-50 11,5 Triplex Galvanized basic components of different lengths to build Triplex R units. Tube Ø 33,7 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces R 29-407-55 16,0 Triplex Galvanized basic components of different lengths to build Triplex R units. Tube Ø 33,7 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces R 29-407-60 26,0 Triplex Galvanized basic components of different lengths to build Triplex R units. Tube Ø 33,7 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces R 29-407-65 34,0 Triplex Galvanized basic components of different lengths to build Triplex R units. Tube Ø 33,7 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces R 63-120-49 4,5 Triplex Galvanized basic components of different lengths to build Triplex R units. Tube Ø 33,7 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces R 63-130-00 1,6 Triplex Galvanized basic components of different lengths to build Triplex R units. Tube Ø 33,7 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Top unit 48 29-407-80 16,0 Triplex Galvanized. With adjustable spindle (Ø 48,3 mm). 1 top unit 48 left and 1 top unit 48 right are required to assemble a Triplex brace. Top unit 48 right includes hexagonal screws M16x40 and locking nuts M16.
Triplex Top unit 48 29-407-85 16,0 Triplex Galvanized. With adjustable spindle (Ø 48,3 mm). 1 top unit 48 left and 1 top unit 48 right are required to assemble a Triplex brace. Top unit 48 right includes hexagonal screws M16x40 and locking nuts M16.
Triplex Foot plate 48 29-407-75 5,5 Triplex Galvanized. Particularly solid foot plate for braces up to Ø 48,3 mm such as Triplex R. Delivery includes head bolt 16/90 and cotter pin 4.
Triplex Triplex SB 29-407-15 71,0 Triplex Galvanized. Triplex SB braces are primarily used for additional load transfer when forming single-sided walls of 6,00 m or higher with support frames STB 450 and extensions 150. Triplex SB braces are delivered as modules without foot plates or formwork-prop connectors and are assembled on site to the required length. The necessary connecting bolts are provided with the height and base extensions. Triplex SB 630 can be ordered pre-assembled. Each Triplex SB 780/880/980 requires one SB 300 righ/left-hand thread and an intermediate piece SB 100, 200 or 300 respectively.
Triplex Triplex SB 29-407-17 71,0 Triplex Galvanized. Triplex SB braces are primarily used for additional load transfer when forming single-sided walls of 6,00 m or higher with support frames STB 450 and extensions 150. Triplex SB braces are delivered as modules without foot plates or formwork-prop connectors and are assembled on site to the required length. The necessary connecting bolts are provided with the height and base extensions. Triplex SB 630 can be ordered pre-assembled. Each Triplex SB 780/880/980 requires one SB 300 righ/left-hand thread and an intermediate piece SB 100, 200 or 300 respectively.
Triplex Triplex intermediate pieces SB 29-407-30 15,0 Triplex Galvanized basic components of different lengths to build Triplex SB units. Tube Ø 48,3 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces SB 29-407-35 22,0 Triplex Galvanized basic components of different lengths to build Triplex SB units. Tube Ø 48,3 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces SB 29-407-40 37,0 Triplex Galvanized basic components of different lengths to build Triplex SB units. Tube Ø 48,3 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces SB 29-407-45 52,0 Triplex Galvanized basic components of different lengths to build Triplex SB units. Tube Ø 48,3 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces SB 63-120-49 4,5 Triplex Galvanized basic components of different lengths to build Triplex SB units. Tube Ø 48,3 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Triplex intermediate pieces SB 63-130-00 1,6 Triplex Galvanized basic components of different lengths to build Triplex SB units. Tube Ø 48,3 mm. Delivery includes the required connecting material (hexagonal screws M16x40 and locking nuts M16).
Triplex Top unit 73 29-407-25 19,0 Triplex Galvanized. With adjustable spindle (Ø 73 mm). 1 top unit 73 left and 1 top unit 48 right are required to assemble a Triplex brace. Top unit 73 right includes hexagonal screws M16x40 and locking nuts M16.
Triplex Top unit 73 29-407-20 19,0 Triplex Galvanized. With adjustable spindle (Ø 73 mm). 1 top unit 73 left and 1 top unit 48 right are required to assemble a Triplex brace. Top unit 73 right includes hexagonal screws M16x40 and locking nuts M16.
Triplex Foot plate 73 29-407-74 9,6 Triplex Galvanized. Particularly sturdy foot plate for Triplex SB. Delivery includes screw M30x150 and nut M30.
Triplex Formwork-prop connector 29-804-85 1,7 Triplex Galvanized. Is used to connect braces, brace frames and push-pull props (max. Ø 48,3 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
Triplex Flange screw 29-401-10 1,1 Triplex Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
Triplex Flange screw 29-401-12 1,2 Triplex Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
Triplex Head bolt 16/90 42-413-50 0,2 Triplex Galvanized. Is used to attach push-pull props or braces to foot plates and formwork-prop connectors.
Triplex Cotter pin 4 62-010-04 0,1 Triplex Not shown. Galvanized. Locks the head bolt.
MevaDec MD primary beam 22-300-98 0,27 24,0 MevaDec Aluminium with high-quality annealed powder coating. Primary beams and MD drop heads are the load-bearing system of MevaDec. The grooves are punched to reduce the cleaning effort.
MevaDec MD primary beam 22-301-00 0,21 18,0 MevaDec Aluminium with high-quality annealed powder coating. Primary beams and MD drop heads are the load-bearing system of MevaDec. The grooves are punched to reduce the cleaning effort.
MevaDec MD primary beam 22-301-10 0,16 14,0 MevaDec Aluminium with high-quality annealed powder coating. Primary beams and MD drop heads are the load-bearing system of MevaDec. The grooves are punched to reduce the cleaning effort.
MevaDec MD primary beam 22-301-20 0,08 7,4 MevaDec Aluminium with high-quality annealed powder coating. Primary beams and MD drop heads are the load-bearing system of MevaDec. The grooves are punched to reduce the cleaning effort.
MevaDec MD secondary beam 22-301-50 0,02 9,0 MevaDec Aluminium profile with plastic nailing strips on top and at the bottom. Can be used in 2 ways: a) If used with the primary-and-secondary-beam method, it supports the facing. b) With the drop-head-beam panel method it is used for compensation.
MevaDec MD secondary beam 22-301-60 0,01 4,0 MevaDec Aluminium profile with plastic nailing strips on top and at the bottom. Can be used in 2 ways: a) If used with the primary-and-secondary-beam method, it supports the facing. b) With the drop-head-beam panel method it is used for compensation.
MevaDec MD drop head 29-301-45 0,01 8,3 MevaDec Galvanized, partly with high-quality annealed powder coating. A safety latch prevents disengagement. The MD drop head permits lowering the formwork by approx. 19 cm so that it can be removed and re-used to form the next cycle (early stripping). Only props with drop heads remain in position to support the slab until the final setting of the concrete. The pluggable drop head is secured with pin 14/90 to EuMax props or with pin 14/135 to the aluminium profile of MEP props.
MevaDec MD prop head 29-301-80 2,7 MevaDec Galvanized, with high-quality annealed powder coating. Supports the MD panels and secures them automatically against unhooking. The panels can be suspended from below or placed from the top. The prop head is mounted to EuMax props with 2 bolts M12x35 and lock nut M12 or to the aluminium profile of MEP props with bolts M16x40 and lock nut M16. The pluggable prop head is secured with pin 14/90 to EuMax props or with pin 14/135 to the aluminium profile of MEP props.
MevaDec MD prop head 29-301-85 2,7 MevaDec Galvanized, with high-quality annealed powder coating. Supports the MD panels and secures them automatically against unhooking. The panels can be suspended from below or placed from the top. The prop head is mounted to EuMax props with 2 bolts M12x35 and lock nut M12 or to the aluminium profile of MEP props with bolts M16x40 and lock nut M16. The pluggable prop head is secured with pin 14/90 to EuMax props or with pin 14/135 to the aluminium profile of MEP props.
MevaDec MD panel 22-300-40 160/160 2,56 47,7 MevaDec The panel frames are made up of closed 2-chamber aluminium profiles and torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. The height is 14 cm and the frame 22 mm thick. The panels have an alkus GM 10 facing.
MevaDec MD panel 22-300-51 160/80 1,28 23,1 MevaDec The panel frames are made up of closed 2-chamber aluminium profiles and torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. The height is 14 cm and the frame 22 mm thick. The panels have an alkus GM 10 facing.
MevaDec MD panel 22-300-56 160/60 0,96 18,7 MevaDec The panel frames are made up of closed 2-chamber aluminium profiles and torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. The height is 14 cm and the frame 22 mm thick. The panels have an alkus GM 10 facing.
MevaDec MD panel 22-300-61 160/40 0,64 13,9 MevaDec The panel frames are made up of closed 2-chamber aluminium profiles and torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. The height is 14 cm and the frame 22 mm thick. The panels have an alkus GM 10 facing.
MevaDec MD panel 22-300-71 80/80 0,64 12,3 MevaDec The panel frames are made up of closed 2-chamber aluminium profiles and torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. The height is 14 cm and the frame 22 mm thick. The panels have an alkus GM 10 facing.
MevaDec MD panel 22-300-76 80/60 0,48 9,9 MevaDec The panel frames are made up of closed 2-chamber aluminium profiles and torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. The height is 14 cm and the frame 22 mm thick. The panels have an alkus GM 10 facing.
MevaDec MD panel 22-300-81 80/40 0,32 7,4 MevaDec The panel frames are made up of closed 2-chamber aluminium profiles and torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. The height is 14 cm and the frame 22 mm thick. The panels have an alkus GM 10 facing.
MevaDec MD compensation beam 22-302-50 5,0 MevaDec Aluminium profile with high-quality annealed powder coating. Is equipped with a nailing to support job-built filler areas. For 21 mm facing (for 27 mm facing upon request).
MevaDec MD compensation beam 22-302-60 3,0 MevaDec Aluminium profile with high-quality annealed powder coating. Is equipped with a nailing to support job-built filler areas. For 21 mm facing (for 27 mm facing upon request).
MevaDec MD compensation beam 22-302-80 1,7 MevaDec Aluminium profile with high-quality annealed powder coating. Is equipped with a nailing to support job-built filler areas. For 21 mm facing (for 27 mm facing upon request).
MevaDec MD compensation beam 22-302-70 1,0 MevaDec Aluminium profile with high-quality annealed powder coating. Is equipped with a nailing to support job-built filler areas. For 21 mm facing (for 27 mm facing upon request).
MevaDec MD assembly lock 29-302-25 1,4 MevaDec Galvanized. Tightly connects MD panels to each other and clamps MD compensation beams to MD panels. Clamping length 4,4 cm.
MevaDec MD beam stiffener 29-301-90 1,8 MevaDec Galvanized. Is used to secure cantilevering primary beams against lifting, e.g. at slab edges.
MevaDec MD prop connector 29-302-30 2,0 MevaDec Galvanized. Permits support of primary beams where no drop head can be used, e.g. for intermediate support, at walls and with cantilevering primary beams. Is attached to the underside of the primary beam with its integrated hammerhead screw. The prop connector is provided with an eye to attach a tensioning chain to anchor the slab formwork to the ground, e.g at slab edges.
MevaDec MD safety claw 29-302-10 0,5 MevaDec Galvanized. Clamps planks to the bottom of primary beams. When using MEP props, the safety claw can be used to attach a tripod to the aluminium profile.
MevaDec MD assembly stick 340 29-302-35 4,1 MevaDec Galvanized. Eases the assembly when applying the panel method. The panels are simply swung up and temporarily supported by the MD assembly stick. We recommend using 2 sticks for a smooth assembly sequence. The stick has an adjustment range from 1,95 to 3,40 m.
MevaDec MD dismantling auxiliary 29-302-40 2,9 MevaDec Galvanized. Eases stripping of primary beams if these stick to the slab due to an increased concrete adhesion or inclined props.
MevaDec Cleaning scraper 29-905-90 2,8 MevaDec Galvanized. With chisel. Is used to clean the groove of the MD primary beam.
MevaDec Spare blade for cleaning scraper 40-092-55 0,1 MevaDec Spare part. Replaces the used blade of the cleaning scraper.
MevaDec MD cover profile 10 29-302-60 1,1 MevaDec Plastic cover. Closes the gap between two MD panels when applying the drop-head-beam-panel method (FTE). Length 1,50 m.
MevaDec MD support for guard-railing post / panel 29-301-60 2,9 MevaDec Galvanized. Permits attachment of a guard-railing post at the MD panels and is used to form a stop end at the edge of the slab.
MevaDec MD support for guard-railing post / beam 29-301-70 2,0 MevaDec Galvanized. Permits attachment of a guard-railing post at primary and secondary beams and is used to form a stop end at the edge of the slab with primary and secondary beams.
MevaDec Guard-railing post 29-106-75 3,7 MevaDec Galvanized. Is plugged into the MD support for panel or beam.
MevaDec Guard-railing post 29-106-85 4,7 MevaDec Galvanized. Is plugged into the MD support for panel or beam.
MevaDec Guard-railing post 48 29-106-80 5,5 MevaDec Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
MevaDec Guard-railing post 48 29-920-80 5,5 MevaDec Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
MevaDec Railing clamp 29-107-20 6,6 MevaDec Coated. Is used as side railing at the slab edge and can be clamped to all kinds of beams or concrete slabs. Railing clamp 100: height 100 cm, clamping length 45 cm Railing clamp 140: height 140 cm, clamping length 50 cm.
MevaDec Railing clamp 29-107-25 9,4 MevaDec Coated. Is used as side railing at the slab edge and can be clamped to all kinds of beams or concrete slabs. Railing clamp 100: height 100 cm, clamping length 45 cm Railing clamp 140: height 140 cm, clamping length 50 cm.
MevaDec Scaffold tube 29-412-23 9,4 MevaDec Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
MevaDec Scaffold tube 29-412-26 14,1 MevaDec Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
MevaDec Scaffold tube 29-412-27 18,8 MevaDec Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
MevaDec Scaffold tube 29-412-25 23,5 MevaDec Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
MevaDec Scaffold tube 29-412-28 28,2 MevaDec Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
MevaDec Swivel-joint coupler 48/48 29-412-52 1,2 MevaDec Galvanized. Connects 2 scaffold tubes with Ø 48,3 mm at any angle required.
MevaDec MD laser support 29-302-50 1,9 MevaDec Aluminium. Is attached to the groove of the primary beam and allows one person to level the slab formwork.
MevaDec Transport angle 14 29-305-30 17,0 MevaDec Is used to stack and transport 5 to 12 MD panels. Distance between holes is 14 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
MevaDec Transport angle 14 29-305-35 12,9 MevaDec Is used to stack and transport 5 to 12 MD panels. Distance between holes is 14 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
MevaDec Swivel-type castor 100 29-305-95 1,2 MevaDec Is used to move MD panel stacks in transport angles 14 or in the MD transport rack (4 castors are required in either case). The load capacity per castor is 1 kN. The overall height of the stack including castors is 2,10 m with transport angles and 2,45 m with the MD transport rack.
MevaDec MD transport rack 27-000-60 128,0 MevaDec Galvanized. Is used to stack and transport up to 14 panels 160 x 80 cm. Two transport racks can be stacked (length/width/height 175 x 82 x 232 cm). For the operation and safety check see the transport rack Operating Instructions.
MevaDec MEP prop with SAS 29-907-65 (185-300) 25,4 MevaDec Combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 the load capacity is as follows when used as a single prop: MEP 300 with SAS - 40 kN at any extension; MEP 450 with SAS - 20 kN at any assembly position (or 30 kN when the inner tube is at the bottom). Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec MEP prop with SAS 29-908-40 (225-340) 0,01 32,2 MevaDec Combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 the load capacity is as follows when used as a single prop: MEP 300 with SAS - 40 kN at any extension; MEP 450 with SAS - 20 kN at any assembly position (or 30 kN when the inner tube is at the bottom). Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec MEP prop with SAS 29-907-70 (300-450) 34,5 MevaDec Combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 the load capacity is as follows when used as a single prop: MEP 300 with SAS - 40 kN at any extension; MEP 450 with SAS - 20 kN at any assembly position (or 30 kN when the inner tube is at the bottom). Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec MEP prop with SAS 29-908-30 (340-490) 0,01 42,8 MevaDec Combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 the load capacity is as follows when used as a single prop: MEP 300 with SAS - 40 kN at any extension; MEP 450 with SAS - 20 kN at any assembly position (or 30 kN when the inner tube is at the bottom). Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 30 29-907-46 (98-150) 10,4 MevaDec Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 30 29-907-51 (152-250) 18,1 MevaDec Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 30 29-908-11 (192-290) 0,01 26,5 MevaDec Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 30 29-907-61 (202-350) 23,0 MevaDec Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 30 29-908-20 (242-390) 0,01 31,5 MevaDec Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 30 29-907-62 (252-450) 32,4 MevaDec Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 30 29-908-24 (292-490) 0,01 40,8 MevaDec Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 20 29-907-36 (177-300) 16,9 MevaDec Galvanized. According to the European Standard EN 1065 class D the admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 20 29-908-17 (187-310) 20,0 MevaDec Galvanized. According to the European Standard EN 1065 class D the admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 20 29-907-41 (225-400) 23,8 MevaDec Galvanized. According to the European Standard EN 1065 class D the admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 20 29-908-27 (235-410) 27,0 MevaDec Galvanized. According to the European Standard EN 1065 class D the admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 20 29-907-45 (302-550) 38,0 MevaDec Galvanized. According to the European Standard EN 1065 class D the admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec EuMax 20 29-908-29 (312-560) 40,2 MevaDec Galvanized. According to the European Standard EN 1065 class D the admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
MevaDec Forked prop head 29-206-40 3,0 MevaDec Galvanized. The forked prop head can be used as a support instead of a drop head at the beginning or end of a primary beam row. The forked prop head 20 is applied with formwork girders H20 and.
MevaDec Pin 29-909-90 0,2 MevaDec Galvanized. Is used to attach MD drop heads, MD prop heads of forked prop heads, etc. Pin 14/90 is used for steel tube props up to Ø 63 mm. Pin 14/135 is used with the aluminium profile of MEP props and MEP extension pieces.
MevaDec Pin 29-909-94 0,1 MevaDec Galvanized. Is used to attach MD drop heads, MD prop heads of forked prop heads, etc. Pin 14/90 is used for steel tube props up to Ø 63 mm. Pin 14/135 is used with the aluminium profile of MEP props and MEP extension pieces.
MevaDec Tripod 29-905-50 12,2 MevaDec Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The turnable legs allow the tripod to be used in rooms, along walls or in corners. The tripod can be attached to the aluminium profile of the MEP props with the MD safety claw.
MevaDec Tripod 29-905-52 17,7 MevaDec Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The turnable legs allow the tripod to be used in rooms, along walls or in corners. The tripod can be attached to the aluminium profile of the MEP props with the MD safety claw.
MevaDec Accessories for attachment 63-120-60 4,3 MevaDec Are used to attach MD drop heads and MD prop heads to the MD/ME props.
MevaDec Accessories for attachment 63-130-10 0,1 MevaDec Are used to attach MD drop heads and MD prop heads to the MD/ME props.
MevaDec Accessories for attachment 63-120-49 4,5 MevaDec Are used to attach MD drop heads and MD prop heads to the MD/ME props.
MevaDec Accessories for attachment 63-130-00 1,6 MevaDec Are used to attach MD drop heads and MD prop heads to the MD/ME props.
MevaDec Accessories for attachment 62-030-42 1,0 MevaDec Are used to attach MD drop heads and MD prop heads to the MD/ME props.
MevaFlex Shuttering panel 3S 29-324-30 250/50 1,25 11,8 MevaFlex Three-layer plywood forming face, 21 mm thick, with resistant coating on both sides. Good pore structure of the concrete due to absorbent surface. Alternative: alkus all-plastic facing. -
MevaFlex Shuttering panel 3S 29-324-20 200/50 1,00 9,5 MevaFlex Three-layer plywood forming face, 21 mm thick, with resistant coating on both sides. Good pore structure of the concrete due to absorbent surface. Alternative: alkus all-plastic facing. -
MevaFlex Shuttering panel 3S 41-324-10 150/50 0,75 8,0 MevaFlex Three-layer plywood forming face, 21 mm thick, with resistant coating on both sides. Good pore structure of the concrete due to absorbent surface. Alternative: alkus all-plastic facing. -
MevaFlex Shuttering panel 3S 41-324-00 100/50 0,50 5,5 MevaFlex Three-layer plywood forming face, 21 mm thick, with resistant coating on both sides. Good pore structure of the concrete due to absorbent surface. Alternative: alkus all-plastic facing. -
MevaFlex Shuttering panel 3S 41-324-60 300/100 3,00 31,0 MevaFlex Three-layer plywood forming face, 21 mm thick, with resistant coating on both sides. Good pore structure of the concrete due to absorbent surface. Alternative: alkus all-plastic facing. -
MevaFlex Shuttering panel 3S 41-324-35 250/100 2,50 26,0 MevaFlex Three-layer plywood forming face, 21 mm thick, with resistant coating on both sides. Good pore structure of the concrete due to absorbent surface. Alternative: alkus all-plastic facing. -
MevaFlex Shuttering panel 3S 41-324-25 200/100 2,00 21,0 MevaFlex Three-layer plywood forming face, 21 mm thick, with resistant coating on both sides. Good pore structure of the concrete due to absorbent surface. Alternative: alkus all-plastic facing. -
MevaFlex Shuttering panel 7S 41-324-40 250/125 3,13 33,0 MevaFlex Not shown. Multi-layer plywood forming face, 21 mm thick, with film-coating on both sides and edge protection.
MevaFlex Formwork girder H20 29-206-02 12,3 MevaFlex Robust multi-purpose girder for the most different tasks. While the girder itself does not weigh much, it has a high load-bearing capacity (approved by building authorities). Admissible load: Q = 11 kN, M = 5 kNm.
MevaFlex Formwork girder H20 29-206-05 14,5 MevaFlex Robust multi-purpose girder for the most different tasks. While the girder itself does not weigh much, it has a high load-bearing capacity (approved by building authorities). Admissible load: Q = 11 kN, M = 5 kNm.
MevaFlex Formwork girder H20 29-206-10 16,5 MevaFlex Robust multi-purpose girder for the most different tasks. While the girder itself does not weigh much, it has a high load-bearing capacity (approved by building authorities). Admissible load: Q = 11 kN, M = 5 kNm.
MevaFlex Formwork girder H20 29-206-20 19,5 MevaFlex Robust multi-purpose girder for the most different tasks. While the girder itself does not weigh much, it has a high load-bearing capacity (approved by building authorities). Admissible load: Q = 11 kN, M = 5 kNm.
MevaFlex Formwork girder H20 29-206-30 22,5 MevaFlex Robust multi-purpose girder for the most different tasks. While the girder itself does not weigh much, it has a high load-bearing capacity (approved by building authorities). Admissible load: Q = 11 kN, M = 5 kNm.
MevaFlex Formwork girder H20 29-206-45 24,5 MevaFlex Robust multi-purpose girder for the most different tasks. While the girder itself does not weigh much, it has a high load-bearing capacity (approved by building authorities). Admissible load: Q = 11 kN, M = 5 kNm.
MevaFlex Formwork girder H20 29-206-48 29,5 MevaFlex Robust multi-purpose girder for the most different tasks. While the girder itself does not weigh much, it has a high load-bearing capacity (approved by building authorities). Admissible load: Q = 11 kN, M = 5 kNm.
MevaFlex Connector Clip H20 29-930-85 0,7 MevaFlex Not shown. Galvanized. Is used to connect wooden H20 girders to each other. The wedge locks the girdes into place and releases them. -
MevaFlex Folding head with wedge 29-107-40 17,2 MevaFlex Galvanized. Replaces the folding prop head SKK (29-107-50) and the wedge head (29-107-45).
MevaFlex MEP prop with SAS quick-lowering system 29-907-65 (185-300) 25,4 MevaFlex The MEP prop has a steel inner tube and an aluminium outer tube with a T-groove to attach reinforcing frames. The SAS quick-lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to European standard EN 1065 class E, the MEP 300 props with SAS have a load capacity of 40 kN at all extensions. The MEP 450 props with SAS have a load capacity of 20 kN; if assembled with the inner tube downwards, the load capacity increases to 30 kN. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
MevaFlex MEP prop with SAS quick-lowering system 29-907-70 (300-450) 34,5 MevaFlex The MEP prop has a steel inner tube and an aluminium outer tube with a T-groove to attach reinforcing frames. The SAS quick-lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to European standard EN 1065 class E, the MEP 300 props with SAS have a load capacity of 40 kN at all extensions. The MEP 450 props with SAS have a load capacity of 20 kN; if assembled with the inner tube downwards, the load capacity increases to 30 kN. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
MevaFlex EuMax 30 29-907-46 (98-150) 10,4 MevaFlex Galvanized. Complies with European standard EN 1065, class E. The admissible load is 30 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
MevaFlex EuMax 30 29-907-51 (152-250) 18,1 MevaFlex Galvanized. Complies with European standard EN 1065, class E. The admissible load is 30 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
MevaFlex EuMax 30 29-907-61 (202-350) 23,0 MevaFlex Galvanized. Complies with European standard EN 1065, class E. The admissible load is 30 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
MevaFlex EuMax 30 29-907-62 (252-450) 32,4 MevaFlex Galvanized. Complies with European standard EN 1065, class E. The admissible load is 30 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
MevaFlex EuMax 20 29-907-36 (177-300) 16,9 MevaFlex Galvanized. Complies with European standard EN 1065, class D. The admissible load is 20 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
MevaFlex EuMax 20 29-907-41 (225-400) 23,8 MevaFlex Galvanized. Complies with European standard EN 1065, class D. The admissible load is 20 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
MevaFlex EuMax 20 29-907-45 (302-550) 38,0 MevaFlex Galvanized. Complies with European standard EN 1065, class D. The admissible load is 20 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
MevaFlex Forked prop head 29-206-40 3,0 MevaFlex Galvanized. Supports wooden formwork girders. Is attached to EuMax props with pin 14/90 or to MEP props with pin 14/135. The forked prop head 20 is used with H20 formwork girders
MevaFlex Beam clamp H20 29-907-00 0,8 MevaFlex Galvanized. Is used to position intermediate props below H20 girders. Is attached to Eumax props with pin 14/90 or to MEP props with pin 14/135.
MevaFlex Pin 29-909-94 0,1 MevaFlex Galvanized. Is used to secure forked prop heads, beam clamps etc. to props. Pin 14/90 is used for connection to steel tubes up to Ø 63 mm and pin 14/135 for connection to the aluminium outer tube of MEP props or extensions.
MevaFlex Pin 29-909-90 0,2 MevaFlex Galvanized. Is used to secure forked prop heads, beam clamps etc. to props. Pin 14/90 is used for connection to steel tubes up to Ø 63 mm and pin 14/135 for connection to the aluminium outer tube of MEP props or extensions.
MevaFlex Beam clamp H20/H20 29-411-64 0,9 MevaFlex Galvanized. Is used to attach planks or cross beams to H20 beams when using slab tables.
MevaFlex Beam clamp 8 29-207-40 2,7 MevaFlex Not shown. Clamps stringers to joists and is suited for wooden formwork girders H20. -
MevaFlex Forked assembly stick H20 29-206-90 2,2 MevaFlex Aluminium tube and galvanized fork. Is used to assemble and strip stringers and joists of the MevaFlex slab formwork.
MevaFlex Brace frame 29-905-80 (145-245) 40,5 MevaFlex Is used as a support when erecting Eumax props. Stepless adjustment range from 1450 to 2450 mm. Height is 1000 mm.
MevaFlex Tripod 29-905-50 12,2 MevaFlex Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The tripod’s revolving legs allow it to be used in the middle of a room, along walls or in corners. Is attached to the aluminium profile of MEP props with the MD safety claw.
MevaFlex Tripod 29-905-52 17,7 MevaFlex Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The tripod’s revolving legs allow it to be used in the middle of a room, along walls or in corners. Is attached to the aluminium profile of MEP props with the MD safety claw.
MevaFlex MD safety claw 29-302-10 0,5 MevaFlex Galvanized. Is used to clamp a tripod to the aluminium profile of MEP props.
MevaFlex Cross-bracing clamp 29-907-10 1,0 MevaFlex Galvanized. Is used to brace steel props with boards when the forming height exceeds 3,00 m. Usable for all prop Øs from 48 to 76 mm.
MevaFlex Railing clamp 29-107-20 6,6 MevaFlex Coated. Can be clamped to all types of beams and to free slab edges. Railing clamp 100: 100 cm high, clamping length 45 cm. Railing clamp 140: 140 cm high, clamping length 50 cm.
MevaFlex Railing clamp 29-107-25 9,4 MevaFlex Coated. Can be clamped to all types of beams and to free slab edges. Railing clamp 100: 100 cm high, clamping length 45 cm. Railing clamp 140: 140 cm high, clamping length 50 cm.
MevaFlex Tension belt with hook 29-930-10 3,8 MevaFlex Not shown. For safety against wind load. 50 mm wide, reinforced loop 200 mm, cranked snap hook with safety flap, DIN EN 12195. Adm. load: 25 kN (straight), 50 kN (strapped). Is attached to climbing bracket KLK or bracket extension and with safety eye to concrete wall. This can be done at the cone from the previous pour. -
MevaFlex Tension belt with hook 29-930-15 3,9 MevaFlex Not shown. For safety against wind load. 50 mm wide, reinforced loop 200 mm, cranked snap hook with safety flap, DIN EN 12195. Adm. load: 25 kN (straight), 50 kN (strapped). Is attached to climbing bracket KLK or bracket extension and with safety eye to concrete wall. This can be done at the cone from the previous pour. -
MevaFlex Tension belt clamp H20 29-930-90 1,0 MevaFlex Galvanized. Is attached to two wooden girders H20. With eyes to attach the tension belt.
MevaFlex Tensioning chain 8/2500 29-412-12 2,9 MevaFlex Not shown. Is used to secure the slab formwork, e.g. at slab edges and on cantilevering beams. Two tensioning chains and one coupling units are required. Ø 8 mm, length 2,50 m, load capacity 5 kN. Attention: the tensioning chains must not be used as lifting devices. -
MevaFlex Coupling unit M16 29-412-13 0,9 MevaFlex Not shown. Galvanized. Is used with tensioning chain 8/2500. One side with hook, one side with safety eye. -
Unterzugbock Trestle for beams 40/30 29-500-10 5,1 - Galvanized. Is used as formwork for concrete beams or for stop ends at slab edges.
Unterzugbock Beam clamp 20 79-500-30 1,1 - Galvanized. Is used to attach the trestle for beams 40/30 to the joist. Suitable for formwork girders up to 24 cm high.
Unterzugbock Wedge clamp H20 29-500-45 1,9 - Galvanized. Is used to attach the trestle for beams 40/30 at the top chord of the cross beam H20.
Unterzugbock Retaining rail 29-500-20 6,5 - Galvanized. Secures the trestle for beams 40/30. Is attached together with the tensioning device beneath the cross beam (2 x H20).
Unterzugbock Tensioning device 29-500-35 2,2 - Galvanized. Optimizse the distance between trestles and tightly connects the trestle for beams 40/30 and the retaining rail.
Unterzugbock Height extension 29-500-40 2,3 - Galvanized. Extends the trestle for beams 40/30 in height. Is inserted into the trestle and adjusted to the required height of the beam, then secured with the integrated hammerhead screw.
Unterzugbock Beam support 29-500-25 0,6 - Galvanized. Is attached to the height extension with the integrated hammerhead screw and supports a wooden H20 girder or squared timber.
Unterzugbock Railing clamp 29-107-20 6,6 - Coated. Can be clamped to all kind of beams or free slab edges. Railing clamp 100 with height 100 cm and clamping length 45 cm. Railing clamp 140 with height 140 cm and clamping length 50 cm.
Unterzugbock Railing clamp 29-107-25 9,4 - Coated. Can be clamped to all kind of beams or free slab edges. Railing clamp 100 with height 100 cm and clamping length 45 cm. Railing clamp 140 with height 140 cm and clamping length 50 cm.
Unterzugbock Forked prop head 29-206-40 3,0 - Galvanized. Supports wooden formwork girders. Is attached to EuMax props with pin 14/90 or to MEP props with pin 14/135. The forked prop head 20 is used with H20 formwork girders
Unterzugbock Beam clamp H20 29-907-00 0,8 - Galvanized. Is used to position intermediate props below H20 girders. Is attached to Eumax props with pin 14/90 or to MEP props with pin 14/135.
Unterzugbock Pin 29-909-94 0,1 - Galvanized. Secures MDdrop heads, MD prop heads, forked prop heads etc. to props. The pin 14/90 is used if for steel tubes up to Ø 63 mm and pin 14/135 for the outer tube of MEP props or extensions.
Unterzugbock Pin 29-909-90 0,2 - Galvanized. Secures MDdrop heads, MD prop heads, forked prop heads etc. to props. The pin 14/90 is used if for steel tubes up to Ø 63 mm and pin 14/135 for the outer tube of MEP props or extensions.
Unterzugbock Beam clamp H20/H20 29-411-64 0,9 - Galvanized. Is used to attach planks or cross beams to H20 beams when using slab tables.
Unterzugbock Beam clamp 8 29-207-40 2,7 - Not shown. Is used to clamp stringers to joists and suited for wooden girders H20. -
Unterzugbock Tripod 29-905-50 12,2 - Galvanized. Auxiliary that is used to place and install props of Ø 48-80 mm. The revolving legs of the tripod allow using it right in the middle of a room as well as along the wall or in a corner. Is attached to the aluminium profile of MEP props with a MD safety claw.
Unterzugbock Tripod 29-905-52 17,7 - Galvanized. Auxiliary that is used to place and install props of Ø 48-80 mm. The revolving legs of the tripod allow using it right in the middle of a room as well as along the wall or in a corner. Is attached to the aluminium profile of MEP props with a MD safety claw.
Unterzugbock MD safety claw 29-302-10 0,5 - Galvanized. Clamps a tripod to the aluminium outer tube of a MEP prop.
Unterzugbock MEP prop with SAS 29-907-65 (185-300) 25,4 - The MEP prop is a combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick-lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 (class E) the props have a load capacity of: MEP 300 with SAS: 40 kN independent from the assembly position. MEP 450 with SAS: 20 kN independent from the assembly position; if assembled with the inner tube downwards the load capacity increases to 30 kN. Depending on their application the load capacity varies (refer to Technical Instruction Manual for MevaDec).
Unterzugbock MEP prop with SAS 29-907-70 (300-450) 34,5 - The MEP prop is a combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick-lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 (class E) the props have a load capacity of: MEP 300 with SAS: 40 kN independent from the assembly position. MEP 450 with SAS: 20 kN independent from the assembly position; if assembled with the inner tube downwards the load capacity increases to 30 kN. Depending on their application the load capacity varies (refer to Technical Instruction Manual for MevaDec).
Unterzugbock EuMax 30 29-907-46 (98-150) 10,4 - Galvanized. Complies with European standard EN 1065, class E. The admissible load is 30 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
Unterzugbock EuMax 30 29-907-51 (152-250) 18,1 - Galvanized. Complies with European standard EN 1065, class E. The admissible load is 30 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
Unterzugbock EuMax 30 29-907-61 (202-350) 23,0 - Galvanized. Complies with European standard EN 1065, class E. The admissible load is 30 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
Unterzugbock EuMax 30 29-907-62 (252-450) 32,4 - Galvanized. Complies with European standard EN 1065, class E. The admissible load is 30 kN at all extensions. When used with MEVA formwork systems, higher loads may be admitted (see the MevaDec Technical Instruction Manual).
Unterzugbock EuMax 20 29-907-36 (177-300) 16,9 - Galvanized. Complies with European standard EN 1065, class D. The adm. load capacity is 20 kN at all extensions. When used with MEVA formwork system, higher load capacities are admitted (see Technical Instruction Manual for MevaDec).
Unterzugbock EuMax 20 29-907-41 (225-400) 23,8 - Galvanized. Complies with European standard EN 1065, class D. The adm. load capacity is 20 kN at all extensions. When used with MEVA formwork system, higher load capacities are admitted (see Technical Instruction Manual for MevaDec).
Unterzugbock EuMax 20 29-907-45 (302-550) 38,0 - Galvanized. Complies with European standard EN 1065, class D. The adm. load capacity is 20 kN at all extensions. When used with MEVA formwork system, higher load capacities are admitted (see Technical Instruction Manual for MevaDec).
Unterzugbock Formwork girder H20 29-206-02 12,3 - Robust all-purpose girder for different tasks. High load-bearing capacity with only low weight. Approved by building authorities. Admissible load: Q = 11 kN, M = 5 kNm.
Unterzugbock Formwork girder H20 29-206-05 14,5 - Robust all-purpose girder for different tasks. High load-bearing capacity with only low weight. Approved by building authorities. Admissible load: Q = 11 kN, M = 5 kNm.
Unterzugbock Formwork girder H20 29-206-10 16,5 - Robust all-purpose girder for different tasks. High load-bearing capacity with only low weight. Approved by building authorities. Admissible load: Q = 11 kN, M = 5 kNm.
Unterzugbock Formwork girder H20 29-206-20 19,5 - Robust all-purpose girder for different tasks. High load-bearing capacity with only low weight. Approved by building authorities. Admissible load: Q = 11 kN, M = 5 kNm.
Unterzugbock Formwork girder H20 29-206-30 22,5 - Robust all-purpose girder for different tasks. High load-bearing capacity with only low weight. Approved by building authorities. Admissible load: Q = 11 kN, M = 5 kNm.
Unterzugbock Formwork girder H20 29-206-45 24,5 - Robust all-purpose girder for different tasks. High load-bearing capacity with only low weight. Approved by building authorities. Admissible load: Q = 11 kN, M = 5 kNm.
Unterzugbock Formwork girder H20 29-206-48 29,5 - Robust all-purpose girder for different tasks. High load-bearing capacity with only low weight. Approved by building authorities. Admissible load: Q = 11 kN, M = 5 kNm.
Unterzugbock Z-connector 40 29-207-30 0,2 - Galvanized. Connects H20 stringers to H20 joists (flange height 40 mm). We recommend using double-headed nails for attachment.
Unterzugbock Connector Clip H20 29-930-85 0,7 - Not shown. Galvanized. Is used to connect wooden H20 girders to each other. The wedge locks the girdes into place and releases them. -
MFS Stop-end rail MFS 29-921-50 7,2 MFS Steel, galvanized. Is used to form slab ends for slabs up to 60 cm thick.
MFS Stop-end bracket MFS 29-921-40 14,5 MFS Steel, galvanized. Is used for cantilevering slabs up to 50 cm and slabs up to 40 cm thick. Delivery includes formwork support and and support for MEVA guard-railing post.
MFS Guard-railing post 48 29-920-80 5,5 MFS Galvanized. Provides lateral protection together with the MFS safety mesh. Can be plugged into all walkway brackets, the MFS stop-end rail, the MFS stop-end bracket and shoe MFS. When used together with scaffold tubes for lateral protection, scaffold couplers must be ordered separately.
MFS Stop-end spindle MFS 29-921-55 1,9 MFS Steel, galvanized. DW 15. Is used as an anchor to adjust the stop-end rail and formwork.
MFS Anchor sleeve 29-917-90 5,0 MFS High-density plastic. With nail holder 18. Is pressed onto the nail holder that is nailed to the formwork. Extraction force 40 kN, admissible load 6,5 kN (DW 15). Required minimum concrete strength: 15 N/mm.
MFS Anchor sleeve 29-917-95 7,5 MFS High-density plastic. With nail holder 18. Is pressed onto the nail holder that is nailed to the formwork. Extraction force 40 kN, admissible load 6,5 kN (DW 15). Required minimum concrete strength: 15 N/mm.
MFS Plug 29-922-10 0,6 MFS Plastic. Closes and seals stop-end sleeves and plastic tubes.
MFS Plug 29-922-15 0,7 MFS Plastic. Closes and seals stop-end sleeves and plastic tubes.
MFS Plug 29-922-20 0,8 MFS Plastic. Closes and seals stop-end sleeves and plastic tubes.
MFS Nailable connector for fair-faced concrete 29-921-80 2,0 MFS Plastic, red. For fair-faced concrete plugs DW 15. Is used to attach anchor sleeves DW 15 to the facing.
MFS Fair-faced concrete plug 29-921-85 5,0 MFS Made of concrete. Seals the nailable connector for fair-faced concrete. Is glued with concrete glue A+B.
MFS Wrench MFS 29-921-45 1,0 MFS Steel, galvanized. Eases unscrewing the nailable connector for fair-faced concrete.
MFS Concrete glue A+B 53-210-70 1,0 MFS Not shown. 2-component concrete glue for fair-faced concrete plugs. Quantity is sufficient for 150 plugs. -
MFS Door spindle MFS 29-921-65 4,6 MFS Steel, galvanized, DW 20. Adjustment range 700-1100 mm. Is used to brace door and window blockouts. With nail holes. Torsion-proof and compression-proof. Integrated fail-safe device.
MFS Door spindle MFS 29-921-63 4,0 MFS Steel, galvanized, DW 20. Adjustment range 700-1100 mm. Is used to brace door and window blockouts. With nail holes. Torsion-proof and compression-proof. Integrated fail-safe device.
MFS Brace bracket 80 29-921-35 11,5 MFS Galvanized. Can be used for floor slabs and slab ends up to 80 cm high. Can be inclined by up to +/- 15°. With plastic nail bar. Can be folded for transport.
MFS Flange screw 12 29-900-70 0,8 MFS Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 12 cm.
MFS Double-headed ground nail 25/280 29-800-45 2,0 MFS Not shown. Is used to attach brace bracket 80. Double-headed. Is removed from the earth with the extractor. (to be ordered separately). -
MFS Extractor for double-headed ground nail 29-800-50 0,8 MFS Not shown. Is used to remove the ground nail from the earth together with a lever rod (not supplied). -
MFS Anchor support DW 15 - DW 26,5 29-925-80 1,0 MFS Steel, uncoated. Bottom bent by 45°. Supports DW 15, DW 20 and DW 26,5 tie rods.The tie rods are re-usable if PVC sleeves are used. The anchor support is always attached with the integrated adjusting screw.
MFS Single anchor DW 29-925-40 0,8 MFS Steel, uncoated. Admissible load: DW 15 = 90 kN, DW 20 = 160 kN, DW 26 = 250 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
MFS Single anchor DW 29-925-45 1,3 MFS Steel, uncoated. Admissible load: DW 15 = 90 kN, DW 20 = 160 kN, DW 26 = 250 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
MFS Single anchor DW 29-925-50 2,4 MFS Steel, uncoated. Admissible load: DW 15 = 90 kN, DW 20 = 160 kN, DW 26 = 250 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
MFS Double anchor DW 29-925-60 1,8 MFS Steel, uncoated. Admissible load: DW 15 = 180 kN, DW 20 = 320 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
MFS Double anchor DW 29-925-65 2,7 MFS Steel, uncoated. Admissible load: DW 15 = 180 kN, DW 20 = 320 kN. Is used for 45° anchoring in the bottom slab when using support frames. Attachment at bottom rebar.
MFS Pressure gauge 29-915-15 6,4 MFS Not shown. Measures tractive force of anchors from 250 to 400 kN. Includes compensating plate for tie rods, with 50 mm hole diameter. -
MFS Pressure gauge 29-915-00 6,4 MFS Not shown. Measures tractive force of anchors from 250 to 400 kN. Includes compensating plate for tie rods, with 50 mm hole diameter. -
MFS Coupling nut 29-900-55 0,4 MFS With DW thread. DIN 18216. Connects tie rods to the anchor loops when length extension is necessary. Adm. load capacity and SW depend on nut diameter: Ø 15 mm (90 kN, SW 30), Ø 20 mm (160 kN, SW 36), Ø 26,5 mm (250 kN, SW 46).
MFS Coupling nut 29-900-50 0,7 MFS With DW thread. DIN 18216. Connects tie rods to the anchor loops when length extension is necessary. Adm. load capacity and SW depend on nut diameter: Ø 15 mm (90 kN, SW 30), Ø 20 mm (160 kN, SW 36), Ø 26,5 mm (250 kN, SW 46).
MFS Coupling nut 29-900-56 1,4 MFS With DW thread. DIN 18216. Connects tie rods to the anchor loops when length extension is necessary. Adm. load capacity and SW depend on nut diameter: Ø 15 mm (90 kN, SW 30), Ø 20 mm (160 kN, SW 36), Ø 26,5 mm (250 kN, SW 46).
MFS Upstand bracket 29-925-10 0,8 MFS Adjustment range 100 mm. Is used to brace upstand formwork.
MFS Fix anchor 29-926-60 0,5 MFS Uncoated. Is used to anchor tie rods in the concrete with anchor supports.
MFS Fix anchor 29-926-65 0,9 MFS Uncoated. Is used to anchor tie rods in the concrete with anchor supports.
MFS Fix anchor 29-926-70 1,9 MFS Uncoated. Is used to anchor tie rods in the concrete with anchor supports.
MFS Plastic tube 29-902-30 0,4 MFS Is used as a plastic sleeve for a tie rod that is to be recovered and re-used. 2 m long.
MFS Plastic tube 29-902-28 0,4 MFS Is used as a plastic sleeve for a tie rod that is to be recovered and re-used. 2 m long.
MFS Plastic tube 29-902-29 0,4 MFS Is used as a plastic sleeve for a tie rod that is to be recovered and re-used. 2 m long.
MFS Plastic tube 29-902-27 3,8 MFS Is used as a plastic sleeve for a tie rod that is to be recovered and re-used. 2 m long.
MFS Planing cap DW 29-917-75 1,0 MFS Hard foam, 10 cm long, 45° end piece. For DW 15 and DW 20. Is plugged onto the DW tie rod or on a plastic sleeve for one-sided anchoring of support frames STB. Hole depth 5 cm.
MFS Spiral anchor DW 15/100 29-921-10 6,1 MFS Steel spiral bead, 10 cm long, with styropore core. Is used to attach formwork equipment with tie rods DW 15, e.g. when adjusting the equipment when using push-pull props or the like. Remove the styropore with a 14 mm drill.
MFS Adjustable spanner 29-926-95 1,6 MFS Not shown. For DW 15, DW 20 and DW 26,5. Is used to loosen and unscrew recoverable tie rods. -
MFS Safety mesh 29-920-10 19,4 MFS Steel, painted. Sturdy steel mesh with reinforced edges and closed steel sheet to prevent small items from falling down. The safety mesh serves as railing, sheet and mesh. 500 kg impact protection. Meets the requirements as defined by European standard EN 133374, classes A, B and C.
MFS Safety mesh 29-920-20 10,5 MFS Steel, painted. Sturdy steel mesh with reinforced edges and closed steel sheet to prevent small items from falling down. The safety mesh serves as railing, sheet and mesh. 500 kg impact protection. Meets the requirements as defined by European standard EN 133374, classes A, B and C.
MFS Safety mesh extension 29-920-40 5,0 MFS Steel, painted. Height extension for safety mesh MFS. 500 kg impact protection. Meets the requirements as defined by European standard EN 133374, classes A, B and C.
MFS Safety mesh extension 29-920-30 9,3 MFS Steel, painted. Height extension for safety mesh MFS. 500 kg impact protection. Meets the requirements as defined by European standard EN 133374, classes A, B and C.
MFS Safety mesh corner hinge 29-920-65 0,7 MFS Steel, galvanized. Connects safety meshes MFS at angles from 76° to 284°. Can be attached anywhere at the safety mesh.
MFS Shoe MFS 29-921-70 1,9 MFS Steel, galvanized. Is used together with the spiral anchor, tie rod DW 15 and MEVA guard-railing post 18/134 to provide a lateral protection at free slab edges.
MFS Fall protection device 29-923-25 10,0 MFS The fall protection device is the connection to the person's fall arrest lanyard. It is 12 m long and attached to the horizontal safety line. With snap hook and protective hose according to European standard EN 355.
MFS Horizontal safety line, 16 m 29-923-20 4,5 MFS The horizontal safety line is attached to the concrete fixture on both ends and tensioned with the integrated wratchet. Includes shock absorber, 2 twist locks, wratchet and protection hose.
MFS Concrete fixture with ring bolt 29-923-05 760,0 MFS Octagonal concrete fixture, 100 x 100 x 30 cm. With a centered M16 ring bolt and 4 nail strips at the edges.
MFS Harness 29-923-10 1,2 MFS Made of polyester. Ergonomic. With a front and a rear attachment point for fall arrest at pectoral and shoulder level. Safe quick-lock fastening. Comfortable and breathable shoulder padding.
MEP MEP props with SAS quick-lowering system 29-907-70 (300-450) 34,5 MEP Prop according to standard EN 1065 class E. Steel inner tube and aluminium outer tube with T-groove to attach reinforcing MEP frames. The SAS quick-lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the SAS automatically resets and locks in the original position. Load capacity according to EN 1065 when used as a single shore: MEP 300 with SAS - 40 kN with any adjustment range. MEP 450 with SAS: 20 kN when used as a single prop or 30 kN when assembled with the inner tube downwards. When used together with MEVA systems, higher loads are permitted (see the MevaDec Technical Instruction Manual).
MEP MEP props with SAS quick-lowering system 29-907-65 (185-300) 25,4 MEP Prop according to standard EN 1065 class E. Steel inner tube and aluminium outer tube with T-groove to attach reinforcing MEP frames. The SAS quick-lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the SAS automatically resets and locks in the original position. Load capacity according to EN 1065 when used as a single shore: MEP 300 with SAS - 40 kN with any adjustment range. MEP 450 with SAS: 20 kN when used as a single prop or 30 kN when assembled with the inner tube downwards. When used together with MEVA systems, higher loads are permitted (see the MevaDec Technical Instruction Manual).
MEP MEP frames 29-909-30 15,7 MEP Aluminium. Reinforcing frame that is required when building towers with MEP props. The frames are attached to the aluminium outer tube of the MEP props or extension pieces using the integrated quick connector.
MEP MEP frames 29-909-25 11,9 MEP Aluminium. Reinforcing frame that is required when building towers with MEP props. The frames are attached to the aluminium outer tube of the MEP props or extension pieces using the integrated quick connector.
MEP MEP frames 29-909-20 9,9 MEP Aluminium. Reinforcing frame that is required when building towers with MEP props. The frames are attached to the aluminium outer tube of the MEP props or extension pieces using the integrated quick connector.
MEP MEP frames 29-909-15 7,8 MEP Aluminium. Reinforcing frame that is required when building towers with MEP props. The frames are attached to the aluminium outer tube of the MEP props or extension pieces using the integrated quick connector.
MEP MEP frames 29-909-10 6,4 MEP Aluminium. Reinforcing frame that is required when building towers with MEP props. The frames are attached to the aluminium outer tube of the MEP props or extension pieces using the integrated quick connector.
MEP Extension pieces MEP 29-907-95 20,2 MEP Aluminium profile (same as outer tube of MEP prop) with 2 foot plates. Is used to extend shoring towers. A plug connector MEP and 2 pins 14/135 are required.
MEP Extension pieces MEP 29-907-90 7,5 MEP Aluminium profile (same as outer tube of MEP prop) with 2 foot plates. Is used to extend shoring towers. A plug connector MEP and 2 pins 14/135 are required.
MEP Extension pieces MEP 29-907-85 5,3 MEP Aluminium profile (same as outer tube of MEP prop) with 2 foot plates. Is used to extend shoring towers. A plug connector MEP and 2 pins 14/135 are required.
MEP Plug connector MEP 29-909-85 1,8 MEP Galvanized. Is used to connect MEP props and extensions. Together with 2 pins 14/135 the plug connectors provide a rigid connection.
MEP Spindle MEP 29-909-70 8,0 MEP Galvanized steel spindle. Coarse adjustment with the G-hook, precise adjustment with the robust adjusting nut on the outside thread. The spindle can be bolted to the outer tubes of all MEP props and extension pieces by using four M16x40 screws and 4 nuts (screws must be ordered separately). The adjustment range is as follows: 28 to 80 cm, 68 to 120 cm with MD drop head, 36 to 81 cm with forked drop head plus the height of the selected stringer, 37,5 to 82,5 cm with calotte support MEP.
MEP Basic prop 360 MEP-HD 29-906-45 20,3 MEP Aluminum profile, coated, red, combined with spindle MDP-HD as a single prop, compatible with MEP shoring tower.
MEP Basic prop 360 MEP-HD 29-906-55 16,0 MEP Aluminum profile, coated, red, combined with spindle MDP-HD as a single prop, compatible with MEP shoring tower.
MEP Basic prop 360 MEP-HD 29-906-65 11,7 MEP Aluminum profile, coated, red, combined with spindle MDP-HD as a single prop, compatible with MEP shoring tower.
MEP Basic prop 360 MEP-HD 29-906-75 7,4 MEP Aluminum profile, coated, red, combined with spindle MDP-HD as a single prop, compatible with MEP shoring tower.
MEP Spindle MEP-HD 29-906-85 18,4 MEP Galvanized. Is attached to the MEP-HD basic prop and roughly aligned with its clip. Fine adjustment with lock nut. Adjustment range from 0 to 100 cm. The spindle turns the MEP-HD basic prop into a single prop.
MEP Calotte support MEP 29-909-75 1,3 MEP Galvanized. Is used as foot plate for MEP props and extension pieces on sloped surface for perpendicular load transfer. Max. inclination on all sides is 5° or 9 %.
MEP Folding part MEP 29-910-10 5,8 MEP Galvanized. Allows props beneath slab tables to be folded so that with a transport spreader the slab tables including props can be moved out of the building and for example over parapets without detaching and re-attaching the props.
MEP Beam clamp MEP 29-909-80 0,5 MEP Is used to attach the MD beam to the prop or prop extension.
MEP Forked prop head MEP 29-910-00 4,7 MEP Galvanized. With DW thread to clamp stringers to the prop head. Is safely attached to the inner tube of MEP props with pins 14/90 or to the aluminium outer tube with pins 14/135.
MEP Diagonal cross-brace MEP 29-909-60 9,3 MEP Galvanized. Adjustable cross-brace made of steel tubes. Is used for bracing when prop spacing varies. The two figures 170/90 and 300/180 indicate the maximum and minimum prop spacing.
MEP Diagonal cross-brace MEP 29-909-55 15,3 MEP Galvanized. Adjustable cross-brace made of steel tubes. Is used for bracing when prop spacing varies. The two figures 170/90 and 300/180 indicate the maximum and minimum prop spacing.
MEP Tube coupler DK 48 MEP 29-909-65 1,7 MEP Galvanized. Is used to attach scaffold tubes Ø 48 mm to the aluminium outer tubes of MEP props or extension pieces.
MEP MEP connector for push-pull props 29-910-60 2,6 MEP Galvanized. Is used to attach push-pull props to the aluminium outer tube of the MEP props or extension pieces.
MEP Prop connector 29-910-62 1,7 MEP Galvanized. DW thread Ø 15 mm. Is used to attach props for horizontal bracing, e.g. in case of single-sided formwork. Length of thread approx. 20 cm.
MEP Lift truck MEP 29-909-50 130,0 MEP Galvanized. Is used to lift and move shoring towers and slab tables. Height 2,12 m; load capacity 500 kg. Adjustment range from 62 to 196 cm. The lift truck is positioned below the MEP frames. Always 2 lift trucks are required. When using the lift trucks and for safety inspection observe the lift truck Operating Instructions.
MEP Transport waler MEP 29-910-80 150,0 MEP Galvanized. Is used to move large shoring tower units. Length 2,4 m; load capacity 30 kN (3 tons); 4 wheels. The pre-assembled plug connectors can be adjusted to MEP frames 55, 110, 170 and 220. The number of required walers is determined by the size of the shoring tower unit to be moved. Please observe the transport waler Operating Instructions.
MEP Transport spreader 250/540 29-910-90 733,0 MEP Galvanized, foldable. Max. load capacity 10 kN (1 ton). Is used to move slab tables with a crane. Length can be adjusted from 3,25 m to 5,00 m and width from 0,50 m to 2,00 m. When using the transport spreader, observe its Operating Instructions.
MEP Flange nut 100 29-900-20 0,7 MEP Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 100 mm, SW 27. Admissible load capacity 90 kN.
MEP Crane hanger MEP 29-910-05 3,5 MEP Galvanized. DW thread Ø 15 mm. Is used to move slab tables. Load capacity 10 kN (1 ton). Always 4 crane hangers are required for transport. A flange nut 100 must be ordered separately. Length of thread 52 cm.
MEP Pin 29-909-90 0,2 MEP Galvanized. Is used to safely lock the plug connectors MEP at the profile of the MEP props and extension pieces, forked prop heads, MD drop heads etc. Pin 14/90 is used for the steel inner tube (with max. 63 mm Ø), pin 14/135 for the aluminium profile of the MEP props and extension pieces.
MEP Pin 29-909-94 0,1 MEP Galvanized. Is used to safely lock the plug connectors MEP at the profile of the MEP props and extension pieces, forked prop heads, MD drop heads etc. Pin 14/90 is used for the steel inner tube (with max. 63 mm Ø), pin 14/135 for the aluminium profile of the MEP props and extension pieces.
MEP Connectors 63-120-49 4,5 MEP Not shown. Is used to attach MD drop heads or MEP spindles to the MEP props or extension pieces.
MEP Connectors 63-130-00 1,6 MEP Not shown. Is used to attach MD drop heads or MEP spindles to the MEP props or extension pieces.
MEP Connectors 62-030-42 1,0 MEP Not shown. Is used to attach MD drop heads or MEP spindles to the MEP props or extension pieces.
MEP MEP scaffold platforms 29-910-20 15,0 MEP Aluminium frame with wooden planks, self-locking. Harmonized with the dimensions of the MEP shoring system to allow for working platforms in great heights, e.g. for the application of MevaDec.
MEP MEP scaffold platforms 29-910-25 12,4 MEP Aluminium frame with wooden planks, self-locking. Harmonized with the dimensions of the MEP shoring system to allow for working platforms in great heights, e.g. for the application of MevaDec.
MEP MEP scaffold platforms 29-910-30 9,6 MEP Aluminium frame with wooden planks, self-locking. Harmonized with the dimensions of the MEP shoring system to allow for working platforms in great heights, e.g. for the application of MevaDec.
MEP Scaffold platform with access hatch 29-910-35 14,7 MEP Aluminium frame with wooden planks and access hatch, without ladder, self-locking. Harmonized with the dimensions of the MEP shoring system to allow for working platforms in great heights, e.g. for the application of MevaDec. MEP scaffold platforms 170/33 are used as supplement.
MEP MEP ladder for hatchway 29-910-65 5,0 MEP Aluminium, for MEP scaffold platforms, length 2,80 m, 3,05 m and 3,90 m.
MEP MEP ladder for hatchway 29-910-72 6,0 MEP Aluminium, for MEP scaffold platforms, length 2,80 m, 3,05 m and 3,90 m.
MEP MEP ladder for hatchway 29-910-74 8,0 MEP Aluminium, for MEP scaffold platforms, length 2,80 m, 3,05 m and 3,90 m.
LT50 End Frame LT50 29-153-10 23,9 - Galvanized. Braces the frame leg horizontally at the top and bottom.
LT50 Frame LT50 29-153-35 18,9 - Galvanized. The frames are connected during assembly and secured with clip LT50.
LT50 Frame LT50 29-153-30 15,0 - Galvanized. The frames are connected during assembly and secured with clip LT50.
LT50 Strut LT50 29-153-70 2,5 - Galvanized. Braces the load tower LT50. The struts are attached to the toggle pins of the frames.
LT50 Head spindle 29-153-90 9,8 - Galvanized. With safety device against disengagement. Transfers loads into the frame leg. Adjustment range 23,5 cm.
LT50 Base spindle LT50 29-153-80 9,9 - Galvanized. With safety device against disengagement. Transfers loads into the ground. Adjustment range 23,5 cm.
LT50 Clip LT50 29-153-95 0,1 - Galvanized. Secures frames during crane transport.
LT50 Walkway bracket LT 29-153-50 7,3 - Galvanized. Is used to broaden the scaffolding area. The integrated tube coupling allows the walkway bracket LT to be attached anywhere on the load tower frame. The planking can be attached on the walkway bracket. A guard-railing post must be ordered separately.
LT50 Scaffold tube 29-412-23 9,4 - Galvanized. Braces shoring systems.
LT50 Scaffold tube 29-412-26 14,1 - Galvanized. Braces shoring systems.
LT50 Scaffold tube 29-412-27 18,8 - Galvanized. Braces shoring systems.
LT50 Scaffold tube 29-412-25 23,5 - Galvanized. Braces shoring systems.
LT50 Scaffold tube 29-412-28 28,2 - Galvanized. Braces shoring systems.
LT50 Rigid coupler 48/48 29-412-50 1,1 - Galvanized. Connects 2 scaffold tubes with Ø 48.3 mm at an angle of 90° (SW 22).
LT50 Swivel-joint coupler 48/48 29-412-52 1,2 - Galvanized. Connects 2 scaffold tubes with Ø 48.3 mm at any angle (SW 22).
Stützen ME MEP prop with SAS 29-907-65 (185-300) 25,4 - Combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 the load capacity is as follows when used as a single prop: MEP 300 with SAS - 40 kN at any extension; MEP 450 with SAS - 20 kN at any assembly position (or 30 kN when the inner tube is at the bottom). Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). -
Stützen ME MEP prop with SAS 29-907-70 (300-450) 34,5 - Combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 the load capacity is as follows when used as a single prop: MEP 300 with SAS - 40 kN at any extension; MEP 450 with SAS - 20 kN at any assembly position (or 30 kN when the inner tube is at the bottom). Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). -
Stützen ME Eumax 30 29-907-46 (98-150) 10,4 - Galvanized. Complies with European Standard EN 1065, class E. The admissible load capacity is 30 kN at all extensions. Higher load capacities are admissible when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
Stützen ME