Project: Weather Radar Tower, Munich
Developer: Deutscher Wetterdienst, Offenbach
Contractor (and Architects): Alpine Bau Deutschland AG, Germany, Munich branch
Formwork Engineering: MEVA Germany, Munich branch
A weather radar tower was built north east of Munich, Bavaria, to expand the tower network of the German Weather service. The new tower is 45 m high (without radar equipment) and will start service in mid-2012. A service room had to be poured around the pinnacle after the tower had been poured. But how to “build” the required working platform 40 metres over ground if standard solutions cannot work? Answer: Use STB 300 support frames and attach them horizontally to the tower.
Safe pre-assembly on the ground
The segments of the full-circle working platform were pre-assembled on the ground. The planking and the railing was attached to the support frames of a segment, then each segment was crane-lifted and attached to the tower. The combined segments added up to a large and very robust platform.
MevaFlex for the floor
The floor of the service room was poured using the MevaFlex slab formwork that rested on the working platform supported by the support frames.
Walls poured with the Arcus
After the concrete floor of the service room had set, the room’s round walls were poured with MEVA’s circular formwork Arcus. The Arcus formwork comes with a spindle system that allows the radius of the wall to be steplessly chosen and preset (minimum radius is 275 cm). The slab of the service room was also poured using the MevaFlex.
Referencen for Projets in Commercial & Residential Construction, Architectural Construction, High-Rise Construction and Civil Engineering Construction
High, Fast, Safe: A state-of-the-art biopharmaceutical production plant is being built for the US biotechnology company Biogen, located on the grounds of a former paper factory in Luter bach near Solothurn, Switzerland.
One of the latest thrills: Float like a bird at a skydiving center, where an artificial airstream will keep you up in the air.
The solution: table forms, 5.40 m long to exactly fit into the openings between the columns. Short filler pieces with rounded edges provided a perfect match to the column layout.